I used a piece of 4x4 for the rear spring that was broken when I was about 12 or 13 on my first car

I used there paint before and the paint matched can to can and I bought another can later and it also matched the first order and I was pleased with the quality and price. Tom

Sorry to hear that Doc

I went to Walmart and bought a cheap black carpet . I insulated first then glued and screwed the carpet in place. sorry no pictures of that part

I broke the shaft on the clutch petal in my driveway. I just made it home from a cruise night the night before . Lucky to have a spare

From jalopy journal https://www.jalopyjournal.com/forum/threads/vinegar-radiator-flush.353511/ I ran pure vinegar through my system. Vinegar is a very mild acid and won't hurt anything. Before I used the vinegar I flushed both sides of the cooling system out with clean water and air by rigging up a ...

I did my Edsel with straight vinegar. I don't remember how long I left it in but it worked . it's been clear ever since. I saw the idea on some website it might have been jalopy journal. It's been about 10+ years ago and no problems. Tom

Farm, I would like truck type but any kind that would work and is reasonably priced. Tom

That would be a 3+1 toploader overdrive

https://en.wikipedia.org/wiki/Ford_Topl ... ansmission

Screw on at the speedometer slip in on the standard trans . Tom

Web , I always make mine from 5/16" hard tubing with flare and nut on it from the auto supply store and use a plumbers bender and if your careful it can come out real nice. Tom

I broke a couple and make some temporary ones out of a small bolt, I think 1/4" and 2 or 3 nuts. A pain to adjust but it got me on the road again. They might be still there now that I think about it. Tom

I say sitting is worst, Not to much salt on the roads in Al. Tom

Not sure about yours April but mine had springs on the parking brake cable and it looks similar to one of yours. Tom

Was the boss ticked off when you didn't make it back after lunch? Tom

Thanks April, On the green bed I used a tank made for 49/51 Chevy I think on the tan truck it is on 75 frame so I used a stock tank and piped it with 2" EMT conduit 90s

I have 4 with full coverage for less than half of the wife's Ford ins. and in NJ you only pay for registration once and it's good for a lifetime. But don't ask about taxes. Tom
Americans Collectors Ins.

Thanks Mr. Jones I still need to know about the sheet metal that's attached to the bottom of the intake manifold. Tom

If I take off the sheet metal cover for cleaning under the manifold will I be able to replace it and the little pipe that comes out the front is rusted out , can it be replaced and who sells it or can I just put a piece of 1/2" copper in place of it? Thanks Tom

Yes pink is resistor wire and yes you can remove it