So, by that reasoning, I could use the 66 template and move my cuts 1 inch forward on the frame to keep the wheels centered?. easy enough...

Attempting to use a mid 80's dodge torsion bar set-up....not that complex...I had it alresady installed and realized I didn't have it square...alll original suspension items have been removed...just trying to figure a way to use the 66 template for my " front to back" measurement...would l...

I guess the concern lies in getting the spindle to position correctly in the fender.....just having a hard time cutting loose with $150.00 for "the" template....brown paper and magic marker...I know it will probably pay for itself in aggravation...but having a hard time with $$$( like ever...

I was under that beleif..the call out was due to my suspension swap out(posted in suspension nightmares). Was using a template supplied from a guy in Ca. that dipicts where the frame is to be "notched " so the replacement crossmember has a square suface for mounting. The template is for a ...

Anyone know what the dimension would be on a '66 short wheel base truck, from the center of the front cab mount ,to the center of the core support? just trying to do things right. Thanks...

O.k... going to run a 300/6 with the mild performance of a clifford intake and exhaust, comp cam and a 4 barrel carb. Trans is a mid 70's floor shifter three speed with overdrive.. I been getting different opinions from people...what do you guys think? Any ideas on a good ratio for the rear end? I w...

Got the cross member all clean of prior welds and slag....started laying out the new "notch"in the frame rails...took old template and just took another 1.5 inches out....First bump in the road...the cross member has "pads" at the rear of it ,that when first installed, were welde...

4 cutting wheels,6 sawzall blades,5 grinding wheels and 2hrs on the torches and VOILA!...OFF IT COMES...what a pain. And thats just to get it off...Now the fun part of cleaning off old welds and welding surfaces..But I'd rather do it right to insure assembly and handling...So this time around everyt...

Yeah, My first notion WAS to go with a drop straight axle, add power steering and discs..DUH!...SO HERE i AM...READY TO STRIKE THE TORCH....AGAIN... oH WELL, glad I wasn't further down the line when I caught this...thanks for the support guys..

Hi, first post on my project. Decided to graft a volare type suspenion to my 61'. Everything was going fine UNTIL I went to install shock mounts(?). Then find that I'm high on one side 5/16 . Bolts will not line up.Of course..this is found AFTER all welding and the rails are boxed in. Something abou...

to those asking on my chrysler graft. No pics as yet. Got the itch to do it after reading some articles from Bob's F-100. SO FAR..EASY ENOUGH. My bud did his in a '66 with a 460... likes it. Hey'61 merc...what don't you like about it? Any forseeable problems? I wanted the truck to be a little more m...

Hi..new here,but, I just finished putting a "Diplomat"..front end under my 61...not very difficult. Got a template from Bobs F100( paper)...cut (notch) the frame and get out the welder( DIPLOMATS ETC. ARE STEEL)Picked up the diplomat for $200.00 at the local bone tard...complete with discs...

Just thought I'd drop a note and introduce my Truck..61' short box uni. Have decided to graft a chrysler front suspension on it ( mission accomplished). Going to run a 300 from my buds 66 stepside. Doing an intake, 4 barrel, split headers and cam. Picked up a 3 speed with overdrive...still working o...

any tips on how to successfully replace a complete floor in my unibody? REplacement floor is in one pc...door to door, wraps one inch dowwn to step. Weld on top of old floor border? Remove all?

anyone got tips on fuel tank cleaning..garage style? Tank looks good...still has fuel in it...does smell like an old can of paint tho...