Has anyone installed a one wire alternator on a 223 six? If so, what alternator and mounting brackets did you use?

Jake

Loose king pins will not cause a shimmy. Worn tie rod ends or a steering gearbox that is out of adjustment may cause a shimmy when hitting a bump, but not hen you are traveling at 50-55MPH. You have another issue. Are you sure that the problem is in the front end? Does the steering wheel shake left ...

I need a trailer hitch for my '62 Uni and do not really want to fabricate my own. So, does anyone know of a commercially available trailer hitch that will fit my Slick?

Thanks,
Jake

Very nice! Did you build this from plans, or is it your own design? What is the wingspan?

Jake

Can anyone tell me what these are used for? There are two on the cab and two mounted to the rear of the bed. Are they used for tying off loads?





Jake

Hmmm...it showed up in the preview. Bummer! Let me try this again!

Jake

Hi All, The tailgate that came on Tumbleweeds (our 1964 F100 CC) is sure different. It appears to have been made commercially, but could possibly have been made by an excellent fabricator. Has anyone seen one like this before? I like the different look of this tailgate, but anyone can see what is in...

I will be heading to Illinois this summer if you need some rust free Arizona parts delivered...

Jake

I just replaced the ignition switch bezel in my '64 F100 and found it not to bad of a job. As a matter of fact, I had to remove the switch again the other day to repair some wires that the magic smoke had escaped from.


Jake

We had a 1965 F100, 240 six, three on the tree, manual brakes and manual steering we named "Low Tech" Another was a yellow/white 1966 F250 CC Camper Special named "Old Yellar" Our old 1961 F350 with a factory Ford dump bed was aptly named "Dumpy" And now our 1964 F100 C...

Did anyone make it to PIR this weekend?

Jake

I drove it about 50 miles! With the widows down and the vents open!!!

Hehehe!!!

Jake

foodstick wrote:hahahahah, the very first thing I learned from Joey when he joined the club is that the word PROLLY is a lot easier to say and spell than PROBABLY ! It makes me laugh every time I use it.

o. hukd on fonics wurk 4 me. eye wil uz prolly from now on...

Please excuse my ignorance, but what does "PROLLY" mean?


Jake

Give the '65 to me. I will give it a good home! Hehehe!!!


Jake

Paul,

The PO's son rear ended another driver and the grill, hood and left front fender needed to be replaced. They came from NM. Good eye!

Jake

Well, I finally got to drive Tumbleweeds today. Drove it about 3 miles to the Shell gas station in Tonopah, filled her up then headed back home. Of course, our grand daughter had to ride with me. What fun!!! http://i152.photobucket.com/albums/s198/AZ-Bahaw/Tumbleweeds/RightSidebyFence_zpsf09a6353.jp...

Well...congrats on the new family addition!

Jake

Congrats to you!

I am now working on my second million! I gave up on the first...


Jake

Here is a photo of the cover on the passenger side of our Slick, Tumbleweeds. There is an additional screw hole visible in the cover. Maybe one of the POs mounted a fire extinguisher there? Who knows... http://i152.photobucket.com/albums/s198/AZ-Bahaw/1964%20F100%20Custom%20Cab%20Longbed/64%20F-100%...