looking good - definitely an attention getter

Humm - right hand drive - good job on the interior

It's all Fatman's

IFS stage II with 2"dropped spindles

Rear axle flip kit is also from Fatman

63 uni before http://i1138.photobucket.com/albums/n525/63uni/63%20unibody/63ford_4.jpg pic after - 7" front/5" rear drop/slam + power steering and brakes etc http://i1138.photobucket.com/albums/n525/63uni/63%20unibody/nov_2011005.jpg http://i1138.photobucket.com/albums/n525/63uni/63%20unib...

before pic - 83' 5.0L H.O.





after pic - same engine rebuilt to a 331 stocker - 320hp/380torque

Here are some pics of the final product - Fatman IFS with 2" drop spindles and disc brakes - Fatman rear axle flip / with new leaf springs shocks and fresh brake components - Ididit tilt steering column / power steering rack and power brake booster - new wiring front to back / new gauges from A...

thanks guys

peak torque 384.2 @ 3500

Ok - new build results - after 5 months in the shop, here it is Final numbers - 5 inches lower at the back and 7 inches lower at the front - Fatman IFS with 2 inch drop spindles and disc brakes - rear axle flip / with new leaf springs and brakes - tilt steering collumn / power steering rack and powe...

Holy crap Paul I think you've just awakened the past sorry for the language, but as previously mentioned i've owned this truck for over 30 years - at one point I swapped out my washer fluid container and all components for the other system that was in the donor truck, which consists of a bag for the...

I have a foot operated pump for the windshield washer fluid

cool hey

[/img][url] http://i1138.photobucket.com/albums/n525/63uni/wiper%20switches/63donortruckwiperswitch.jpg [/url] http://i1138.photobucket.com/albums/n525/63uni/wiper%20switches/5pin_2.jpg 3 pin from 63-64 donor truck 5 pin from my 63 f 100 unibody "custom cab'

I need to be educated here... hoping you can... I have owned my truck for 30 + years and still learning I am confused, my truck has a 5 pin wiper switch and from what I have read so far, this switch is for a single speed motor . I stripped a 63 ford unibody donor truck years ago (maybe it was not a ...

I am probably asking for alot but ... do you have a pick ?

I have to make sure I get the correct pin locations

Why are they so hard to find.

What would you be looking at... for price.

Thanks

I need help

I've been surfing the web looking for a single speed ? - 5 pin wiper switch.

My switch blew apart a some point and I didnt notice, therefore all the guts are gone.

I need a new one

Can someone help me here ?

I think that's a great idea, I will do just that.

Thanks

How to install a "hood brace cushion"

Has anyone replaced one of these as seen in the LMC catalogue

63 F 100 unibody

http://i1138.photobucket.com/albums/n525/63uni/63%20unibody/63_1982b.jpg Towing the truck to the bodyshop 1982... removed engine, grille, taillights etc... http://i1138.photobucket.com/albums/n525/63uni/63%20unibody/63ford_rear.jpg Present day look, 275/70 15 Goodyear rubber at back Yes... that's t...

forgot to mention... - when I purchased my baby, there was only surface rust with no perferations / holes; except for what you see in the pics , which is in the back end that was replaced with a donor truck. - all the chrome was good but not perfect... maybe some day i'll get them re-chromed allong ...

Wow, this is what they call 'deja vue'...
I bought my truck in 1980 from a high school buddy that had turned his attention to a 78 trans am
It looks like the same farmer's field only difference is my farmer's field was in Ontario Canada.

check out my tread http://fordtruk.com/forums/viewtopic.php?t=19124:shock: 63 unibody build

Here's a picture of my rear end with what I think is the correct bumper

Here's are two pics taken the day I was bringing the truck to the bodyshop in the fall of '82 - note the height of the front end... the engine, a beat up 351 cleveland was removed (should of kept the heads) http://i1138.photobucket.com/albums/n525/63uni/63%20unibody/63uni_1982.jpg http://i1138.photo...