I need a set as well for a 63 F100


Ricky.

Uncle told me about ya thread. The WOT switch is to kick the trans out of OD for passin. The relay with fuse is for interrupting the dizzy when kicking out of OD. Kills the flow of torque for a teeny length. The powers that be killed them 10 1970 IRCC. As said, they roll in OD if reverse is not enga...

http://s153.photobucket.com/albums/s201 ... I_7607.mp4


Ricky.

jhewitt. If you use the 65 I-beams, use 65 king pins. The king pin retaining bolt hole is in a different location on the 65 I-beam than the later I-beams. Holding the caliper on, there is an "L" shaped piece with a cutout for the bolt,and a spring that looks like a single leaf spring under...

I concur with Michelle.



RickyHasNoWingsToFlyIfHeFellOffBoy.

I like !!



Ricky.

Oh yeah...352 Baby !!!! IMHO you will be happier with the Performer 390 intake....if the 4100 is up to snuff you will be happy with it also. One thing, the 4100 and the 4100 spacer will over hang the Performer intake carb mounting flange and leak vacuum or suck vacuum. Pony Carbs sells a thin metal ...

Hey jimbob1021.

Are you driving it to Slick Stock...... (In case someone missed it, that is a wink )




Ricky

Hey bluebolt.

Thanks !

I will do some more research to see how to proceed.



Ricky.

Cool, I have 2 late model drag links with tight ends.



Thanks.


Ricky.

Thanks banjopicker66.

I put disk spindles on my 65 but havent changed the drag link.

The 65 drag link is shorter and only adjusts on the drivers side.

To get both wheels pointed straight ahead I had to adjust the drag link longer which puts my steering box off center.



Ricky.

That ia beautiful Hoofbeat Racer !!




RickyPrimerBoy.

As to the hole in the steering linkage where the pitman arm goes.

Is the hole the same on 1965 linkage as 1973/1976 linkage ??

Ergo, will the later linkage fit my 1965 pitman arm ??


TIA.



Ricky

Thank you !!

Now, how does one see the VIN or VINS with the cab bolted on the frame ???

,,that is without cutting a slot in the cab floor ...lol...



Ricky.

Thanks guys !! Another question.. The first pic: The VIN is not to far behind the axle...yes ?? The second pic: The VIN is behind the front or rear cab mount...??? So, are those 2 different VIN numbers on the same frame ?? ..and...is the VIN number in the same location on the straight axle trucks an...

Where is the VIN number on the frame of my 65 F-100 ??? The door plate is missing, I had a friend 20 or so years ago weld up some holes in the door, he took the plate off and lost. I went to get the 65 inspected today for the 3rd time. The inspector wants to see if the VIN number of the truck matche...

Hey BigBadDad. What year is the truck ?? Also, if the diapram on the accelerator pump is ruptured it will leak onto the intake. Early model 2100 carbs have a long snout and a screw on top of the accelerator housing. Late 64 and up 2100 carbs have a short snout and no screw on top of the accelerator ...

Hey rcb1020. 352 has 4.0" bore....3.5 stroke.....rods are longer than 390/428 rods. 390 has 4.05 bore...3.78 stroke...6.48 rods Bore 352 block .050 over and use 390 crank pistons and rods. Be aware some 390 pistons have a deck height of 1.6xx which puts them down in the bore. I believe somewher...

Thanks Greg !!

Didnt one of the guys use the adapters on a 1965 F-100 ??


Also, how much would the stuff cost if you purchased it seperate ??


TIA.



Ricky.