Btt

Anyone have a pair of bumper brackets they can sell me? My bumper is the one with two mounting holes on each side. The 64 brackets look like the 65-66 but they actually bolt to the frame horns and not incorporated into them.
Thanks

Sal

Delete post.

charlie - Not to bring up an old thread, but I also need the bushing on the end of the clutch rod that attaches to the Z bar. There wasnt one there so dont know is one is even required. The hole to rod size is much larger. What did you come up with?

So for the inquiring minds....the axle fits! You do need to drill the holes for the lower shock mounts and use about 6-7 degree shims.

So I was offered a lowered axle for a 59 F100 to trade for my stock 64 axle. Ive looked around on the net and the measurements are the same. BUT, will it fit in a slick? I understand there are no lower shock mount holes, but anything else?? Its lowered 3.5 inches and the guy is building a stock look...

Ok that makes more sense now that I can see it ! Thanks.

Ok so the bushings are actually in the spindles right? And the pin may or may not need to be pressed out. If the bushings are in the spindles, I should be able to leave the axle in the truck and not remove it right? Lastly, I need to ream the axle before the new pin goes in? Sorry for all the questi...

Ive never done this and need to. Whats all involved in replacing the king pins. There is a lot of play at each hub and want to rebuild the front end. Do I need any special tools etc.

The gauge in my 64 does the exact same thing. Havent trouble shot it yet.

kevance, keep us posted on the product and installation. Pics would be great!

When you say 64, you just mean the 2 piece unit? The 4 piece 65-66 headliner will fit a 64, correct?

Reverse eye monos should get you about 4" Im having mine re-arched by a local spring shop for $250 and getting 4". The cheapest way to lower the rear IMHO is to do a axle flip. Gave me close to 6". Its pretty easy to do and cost was just labor since I found the steel I needed for free.

Greg D, Ive had mix results with DP spray bedliner in a can. I find if you over spray a wet area, the stuff peals off. Anyone have any tips for applying this stuff.

Any pics of that 65 chevy bumper on the truck.

Good thinking Skip. Before he sold the car, I was trying to convince my buddy to sell me the back bumper off his 1960 Chebby for the back of my slick. It would have needed some trimming, but man it would have looked cool.

I love that look! Any more ideas out there??

Great thanks for the info. I'm using amsoil brand oil. What type of additive should I buy and add?

Ill take one please, Thank You!

I replaced the oil pump on my 292 Y last night. The OE one looks different than the one I got from Napa. Im attaching some pics. First off, the small spring type washer that goes around the drive shaft in the pump was broken when I pulled it off. I couldn't find another one so I installed it with ou...