good to know thank you. yeah I am not building a racer just a cruiser nothing fancy. I have a 302 in it.

so I am planning to pull my c4 out soon to put in a front pump seal. though about doing a shift kit does anyone know of a good shift kit to use and do you have a part number? it is worth putting a kit in it?

thanks every one. right now I have a elderbrock I think it is a 600 cfm that should be ok correct?

I agree, I was more than likely going to drop tranny and replace seals. thank you for all the opinions

thanks everyone that makes me feel better. I am on a budget and can not afford to do a bunch of changes.

great story. love the site and how helpful everyone is. I have learned a lot from the guys here

that is a good idea

it does run fine. he is a good friend coworker but a chevy lover so I take it with a grain of salt.

I have a 65 with a 68 302. the 302 was a 2bbl but I put an elderbrock 4bbl intake and carb on it. a friend who mostly works on Chevy's said I should put a cam in my motor because it burn up since I went from 2 to 4bbl, I personally have not heard that before but he is older and has worked on cars lo...

so through a recommendation to help seal up the seals in my c4 I bought this sealer. so I was reading on it and it says 1oz treats 1 quart ok so 3 quarts would be 3oz easy enough, but it says to drive around for 2 hours well my 65 is not licensed for the street yet and I live in the city so that is ...

Mr. Jones that would be cool. How much?I know I sent a pm but was before I found the reply button.

Been awhile since I posted on this site I mainly am on the Facebook site.any way does anyone
Have a downloaded plans or drawing of a headliner with measurements? I have material to cut out my headliner but could use a pattern to make it easier. It is for my 65 . thanks for anyhelp.

I am thinking about not putting in the headliner.
As far as seats was just thinking of something
A little more comfy. I just leave it as is i am kinda
Into the old skool original look. Thanks for the advice

So the outside is close to being done. Question
On interior if i did not replace the headliner would
The sound be pretty loud on the inside? Also i how
New of pickup can i use a seat out of would a 1990 f150
Bench seat work, bucket seats low back mustang
Seats work? Any advice would be great thanks

Well there is the rod that comes out the side of tranny
And attached to the rod is the bracket the linkage would
Connect to thus when u put it in gear this is the part that
Moves. So I am needing to separate the bracket
And shaft or pin. Sorry I do not know the true name of the parts.

On a c6 tranny the shAft that the shifter connects to how do
I get that arm off the shaft so I can change it? Does heating it
Up with a propa e torch work?

Thanks I will check it out!

Came from a 68 motorhome with a column shift
I had a feeling there was no easy way to fix this
That's ok I would rather it be fixed the right way
So it works and looks good. Thanks for your advice.

I hv a c4 1968 trans in my 65 stepside. I have a floor
Shifter in place of the colum shifter. But need the trans
Connecting rod to be facing up, first how do I take it out
And second can I put it back in facing up to work with my
Shifter?

Sweet guess I get to learn some fabrication