Thanks for your replies. I think I'm going to try and find some longer ones first.

I just installed a 74 disc brake front end on my 66 f100. I purchased new brake hoses for a 74 from Pep Boys but they are too short to clip into the stock 66 brackets by about 2". Do I need to buy a different year hose, build a new mounting bracket, or have custom hoses made? The ones I bought ...

I made one using Lexan plastic instead of the fiber board, but I like that one for the chevelle.

I installed a 74 power steering box on my 66 f100 2wd and it's hitting on the engine perch and the shock mount. I've read about an offset perch for that purpose but I don't know where to find one. Also I could grind the perch and shock mount but I'm concerned about weakening them. Any experience or ...

I have a 66 f100,manual trans and steering. I salvaged a power steering box and steering column from a 74 f100 auto trans. The column turned out to be junk, so I was going to shorten the 66 column. Does anyone have any experience doing this that they could help me with?

I'm from So. Nevada (Henderson) and I found a disc brake conversion kit from John's F-Fun Hundreds in So. Cal. I was wondering if anyone has used this kit or knew of anyone that has and what your opinion of it was,quality etc?

Thank you for the info. I'll start my search today.

I'm a new member from Henderson,Nv., is there acertain year C6 that will bolt up to the 352 in my 66 F100 lwb? Also I found a disc brake conversion kit from John's F-Fun Hundreds part #2020CB, I was wondering if anyone has any experience with this kit and what they thought of it.

Thanks for the replies. The reason for switching out the 3spd for an automatic is my wife is looking forward to driving the truck also. I will post some pictures as soon as I figure out how.

I've just become a member and I acquired a 66 F100 last year that has been in my wife's family since it was new. It has been sitting in a yard for the last 25 years so needless to say it needs alot of work. I'm going to need alot of advice and help thru this build so I would any appreciate any input...