I'll try not to post anymore info>

LED tail light. I did them in my uni. First step is to go to the NAPA dealer and pick up oval stop / turn LED lights. Cut the red lens off the LED lights with your cutoff wheel. I though going though 2 red lens was to much. Using the same cut off wheel cut off the back of the original tail light hou...

Got it fixed. I had the truck parked nose first in the garage. I pulled it out and backed it in . I was 180 out now the wipers work with the truck 180 from before the wipers work. Well not so , after two hours of removing the wiper motor and relocating the arm on the motor 180 and reinstalling the m...

Thanks. I'll try to rotate the arm on the motor. Though someone might have had this kind of problem before. anyone going to Cruisin the Coast ?

Anyone going ? Would to meet any Slicker there this year.

This mod works great . I put them in my 61 and they are working the way power windows should. Thanks to all your help.

Wind shied wipers. OK guys what am I doing WRONG ? I'm putting my 62 Uni together . My wiper ( 2 speed ) motor runs clockwise seems to be the wrong way. Motor wants the park position with the blades up. If I install the blades down at the bottom of the glass the motor turns them into the hood. Is th...

Thanks . That's what I needed to know.

Can anyone tell me if the bumper brackets that vendor sell for the 48-72 " step bumper " are the same as the ones used on the rear bumper of a 61 uni ? In the catalog they sure look the same.

I did this mod on my 61. Works great. Thanks

Special nuts , cage nuts, screws and other clips fasteners check around your area looking for someone that can get parts from a co. Au-Ve-co. Auto- Vehicle Co. Cold Springs Ky. I don't know if they have a web site or not but they have all kinds of automotive fasteners.

I used the hole bed floor and vertical front panel from a Chevy truck bed I got cheap . Fenders were bent up but the floor was nice. Cut the back of the cab under the belt and installed the front panel and floor. Look like it came that way from Ford.

I used C4 corvette suspension front and rear on my 61 Uni. Kit from Flat Out in ca. All works well but I just got it running so I have not had any road time yet.

Wow. What a find. Wish mine had been that good to start with.

I went , great show . A number of Slicks this year, much more than in the past.

Anyone going to cruisin the coast ? Pcola60 8507129169. I'll be there Oct 12-14

Wow. And I though mine was ruff. Great job. One of these days I'll learn how to post pic of my project 61.

Wouldn't be great to tour his place and see them all first hand . Thanks so much for posting .

Wow Great job. Hope mine turns out just close to that. You don't know were I can get a good hood do you ?

I'm interested . Were and when ? Would realy like to meet some of you .