I'm just finishing the truck. Everything is brand new. I have under driven March pulleys. When I say steers to easy I mean when I start the motor and when its sitting in the driveway in park and if turn the steering wheel it will almost keep going on its own. I have two shims left so I'm going to pu...

That's a good idea if nothing else works. I'm just afraid of blowing a seal in the box if its got that much pressure to steer itself.

I'm hoping someone can help me here. I did the Toyota power steering conversion and got all the parts on my own. I bought a steering box, made my own bracket and bought a new GM power steering pump. My problem is my truck steers to easy, almost by itself. So I bought a kit to reduce the pressure in ...

I seen the wire that parks them, but if the wiper coast past that spot they will start up again. There is one more wire that reverses the motor somehow and stops it in its tracks.

Has anyone ever wired a wiper motor on a toggle? I have a 64 single speed motor and would like to wire it off a toggle. I can't get the park mode to work right. I know the end terminal gets 12v ignition power, center is the power to run the wipers and the other end terminal I can't figure.

I just did mine. I called vintage glass where I bought my glass kit and they informed me that there is different thicknesses of tape, and therefore he said they gave the wrong one. He sent me the right stuff and it went together fine. Thank you for the feed back.

Thanks for the info. I might try a glass shop.

Does anyone know what the trick is to replace the glass in the vent windows? I put the sticky tape in the frame and tried banging the glass in with a rubber mallet and no luck. I had the frames powder coated so I hope its not to tight now. Also what do you do with the sticky tape in the corners? The...

Does anyone know the easiest way to align a solid axle?

Thank you everyone for your help.

Does anyone know if there is suppose to be a gasket between the parking light housing and what in bolts to or is it just metal to metal? Thanks for any help.

Thanks guys. I will check them out.

I put a toyota power steering box in my 64 and it leaks bad. I cant seem to find a rebuild kit and any rebuilt box I find is a ton of money. There isnt to much out there. All of the parts stores I went to cant get ether. I was hoping some of you guys on here could get me in the right direction.

Thanks guys.

I thought of a aluminum one. But O think they are pretty pricey. Where is a good place to get one?

I just bought mono leafs for my 64 f-100. Does anyone know where I can get new spring bolts and the bushing that goes in the housing one the frame? Thanks for any help.

I have a 64 f 100 With a 460 in it. It has 11 to 1 compression with a big solid roller cam. My question is I have two radiators. One is from a 61 f 350 but is only a two row and I have one from a 66 f 100 thats is a 3 row. Not sure which to use if ether. I thought about recore the 61 radiator with a...

I got the one from speedway. $287.00 with shipping. I came with everything. No master cylinder. I have a master cylinder from a 70's f-100 with disc drum set up. Hope it works.

Just ordered it. I hope its good stuff.

I am looking to convert my 64 F-100 to disc brakes. I seen a kit in speedway for $289.00 with shipping. I thought that was a real good price. A lot cheaper than I have seen it any where else. I was wondering if any of you guys bought this kit and if so is it any good or should I go with the one from...