pretty sweet man, I want to do a push button start on mine too

wow you do some good work

Started on the 3 point seat belt install. I welded the nuts to a Bushing Washer i had left over from my 78 GMC I gave my mother. They were nice and thick and about an 1.5. So to me it was perfect for a backing plate to make sure everything is re-enforced. I thought about welding it in but it would b...

opps double posted

Where did you get those door panels???

very nice work!

nice work so far

Ive been happy with Carolina Classics and Dennis Carpenter stuff so far.

Did some test fitting on seats with the ranger brackets. So i test fitted some 11 Mustang seats and 01 Mustang seats. These have been modified and fitted with 67 Brackets which was very easy and then mounted to the Ranger Brackets. I ended up putting the 01 seats as they are a little lower and gave ...

Finally completed the passenger side and installed the new front bushing. Then took her for a quick spin up the road http://i803.photobucket.com/albums/yy315/jranger615/10552484_10154825549600521_5422313084396638118_n_zps9b0e776f.jpg http://i803.photobucket.com/albums/yy315/jranger615/10408522_10154...

Finished welding, Filled the outer gap, ran out of weld wire, wire wheeled the floor, hit it with satin red rustoleum i had around the house, then brushable seam sealer, and then another coat of rustoelum. Now i have to do the same under the truck to finish the passenger side http://i803.photobucket...

more weld wire = more welding. almost have the passenger side all done. Just a little more welding, grinding, paint, and seam sealer to go

Well got to work on the truck yesterday and went to TOWN! I got a bunch of spot welds under the truck and once it was done i took the grinding wheel to the inside welds to smooth them out. I then wire wheeled the whole floor panel area and hit it and the inside of the cab support with weld thru prim...

yeah i know the feeling. Ive only been able to get a little bit in at a time lately

Didnt have a lot of time but managed to get it welded in place on the inside. Just a few places to hold it where it needs to be. Now i can get under the truck and welded it in all over http://i803.photobucket.com/albums/yy315/jranger615/1044912_10154644581305521_398642533712301876_n_zps77d21686.jpg

officially ready for welding

nice work!!

longcabjohn wrote:Looking good, you will get there. Did you get the PM about tailgate?


Johnny

I sure did but ive been super busy and such. I appreciate it

Welcome to the madness. It looks like you will have no problem fitting right in. . . Hip deep in what most folks would run away from. Yeah, this is my 3rd go with this type mess. Started with a 78 GMC...complete floor and supports, cab corners, rockers etc etc....That was my learning vehicle which ...

did a little more work this weekend but not much. Got the bushing in place to help with alignment and put shot sheet metal screw in before i got called into work. Waiting on weld thru primer and a such but hopefully ill get this in soon