anyone know of a cheap trailer hitch? $100 ish or under. doesnt have to be that heavy duty

it connects the clutch push rod to the clutch pedal assembly http://i304.photobucket.com/albums/nn187/ganderson2341/20150308_124054_resized_zpsz0zyiyq1.jpg and where might i come about finding one i did the 5 speed swap but im not happy with how the master cylinder bolts up and i think it discourage...

the clearance problem stems from this truck has been tboned i believe my raidius arm cross member is bent the pic is bad but kind of shows it http://i304.photobucket.com/albums/nn187/ganderson2341/20150315_0805382_zpsljxpaxlm.jpg i basically worked off the threory people put automatics in these so i...

been a little bit but built a center concsle and did a m5od swap http://i304.photobucket.com/albums/nn187/ganderson2341/20150222_155825_zpstuz3bhsf.jpg http://i304.photobucket.com/albums/nn187/ganderson2341/20150222_155820_zpseopabgu7.jpg cant really tell by the pic but shifter was moved back some w...

i did forget to mention putting rtv on the shift plugs i had read they leaked alot so ran a quick bead of black rtv around them

start off with the basics my truck has a 300 straight six and a t-18 4 speed and with the ford nine rear end that is about as bullet proof and reliable of a stock drive line as you can get. But 2600 rpms at 65 is not exactly desirable. so my options were: put a 5 speed in it, a torque splitter over ...

i am in the middle of the m5r2 swap. i intend on doing a write up monday if im finished by then. but the what i know so far is: fly wheel: needs to be for the 10inch clutch my stock clutch was 11inch so i ordered a fly wheel out of a 90 f150. the important thing if you switch flywheels is getting on...

does anyone have any pictures of how they mounted a clutch master cylinder in a slick?

well i pulled the trigger on a m5odr2 a few days ago and it just showed up on my front door today! think i will do a write up once i get it all figured out

No I don't need the creeper first. What transmission did you swap in? Taller tires are a option but to equal a over drive I would have to get some where in the mid 30s (32-35) so that is out. I do a lot of highway driving 20 miles to work every day and towns in Kansas are few and far between so I'm ...

how bad our your springs? what do you use the truck for? im running heavy duty gas charged shocks in the front and spring over shocks in the rear and couldnt be happier with it. i ordered from rock auto just have to be careful and read the fine print weather they are sold in pairs or singles

i have a 300 6 cyl 29inch tall tires 3.50 gear and a t18 so running down the high way at 65mph i sit at about 2600rpm which is far from desirable. so the way i see it i have two options either i go with a torque splitter overdrive or a m5od. so ill start off with what i know about my options. torque...

thank you

can someone link me to a site i can decode my vin plate? or decode it for me?

bought some door coolers today. is there anywhere i can buy a trim ring? im short one and can somebody tell me the history of them?

thank you determined my cable is bad

i have a sweep style speedometer and moves from 0-20 on the gauge is there a way to rebuild them? or any ideas on why it is like this

nice truck! can you snap some interior pics next time?

got the truck running and driving over the weekend. took the kids for a ride and got me something to use for a tool box http://i304.photobucket.com/albums/nn187/ganderson2341/2015-02-10%2015.56.35_resized_zpswhgezymj.jpg http://i304.photobucket.com/albums/nn187/ganderson2341/20150210_163326_resized_...

what route do you plan to take?