I used the speedometer drive gear from the 3 speed, it reads 15 mph slower bat 40 mph

I put in a 63 fordomatic transmission in my 63 F100, it had a 3 on the tree I used the original cable but it is reading about 15 mph slower. I was wondering what tooth gear I need to get for it read correctly, any help much appreciated

thanks guys much appreciated!

so I'm putting my truck back together and when I took the fenders off the truck I noticed this white goop between the fender and piece above the grill when I separated them. I was wondering what the goop was and do I need to use it when I put back together?
thanks for the help
James

I ended up getting regular fine thread nuts and using lock washers.

Thanks Guys!

So I purchased a bed bolt kit for my 63 long bed and I was wondering if anybody else has purchased this same kit. The carriage bolts are 11/16" fine thread. I go to install these on my truck and the nut goes on as far as where the bolt starts then you really have to crank down on these to get t...

I bought the housing from John Mummert fits perfect

thanks gonna give them a call

I'm looking to install new 2bbl carb on my '62 292 Y block any suggestions?

probably need to get different size hoses with this part

thanks appreciate the help

I guess what I'm asking is will it work on my truck?

I need a thermostat housing for my '62 292, the ones I see available have the connector to the water pump on the side of the thermostat mine has it inline with thermostat. I hope that makes sense, appreciate any help.
thanks James

I installed shifter from Lokar, it went ok, pleased with the install. Thanks for all the help much appreciated!!

I called Lokar they gave me a part #FMS6FMXBM. You were right Anthony. So I am looking at the picture of the shifter on Summit and I don't see how it's gonna mount to the tranny, I don't see any brackets. I gotta call them back and ask.

anyone know where I can find one
Thanks James

Sounds good thanks

So I took a look in my tank, looks real good maybe some surface rust inside solid all the way around.
One thing I noticed was the fuel line in the tank almost touches the bottom, I was wondering how thick the sealant is, don't want to clog the fuel line

the plan wasn't to put it to pasture my dad had the engine rebuilt and never put it back in. there was no gas when I removed the tank