King pins that are installed too tight or not greased good will cause that problem. james

I thought I read somewhere about counting the freeze plugs on the side of block, 240 had 3 and 300 had 5 I think.

65ford1, I have a early model 302 and kid if your have a six it's my understanding the aod will bolt right up to your six. james

I would buy him a case of beer and find out. james

I put an aod in my 65 and it had a 3 speed in it.Used the Lokar tv cable and it works just greate. The Lokar tv cable came with good instructions on how to adjust.

Thanks for all the nice comments, just a little more info about the truck its got an old school 302 with a aod trans. I love driving this old truck, if I don't drive it at least once a day I get a little down. Its got a set of 3:25 gears and gets 18 mpg. later, james

greg, the color is called wineberry candy and its from House of kolor

I finally found someone to post pictures of my truck. I will add more later. Its been a long time coming. Here is the link
http://s916.photobucket.com/albums/ad2/65f100cruiser/

I had good luck by taping it on from the back side. Clear packing tape was used.

I had good luck by taping it on from the back side. Clear packing tape was used.

where ever they are at when you turn the switch off.

Been searching for info on how to fix wipers that won't go to park when switch is turned off. There was a discussion here many moons ago about this but have not found it. Thanks for any help. James.

Had my grill, bezels and front bumper done in houston tx. for $750

Do you have the heater control knob on the dash pulled out, if not your only geting heat to the defroster vents

I had the same problem years ago with the drums not going back on and after two days of scraching my head I thougft about backing off on the hand brake adjuster and that was the problem.

I had the same problem years ago with the drums not going back on and after two days of scraching my head I thougft about backing off on the hand brake adjuster and that was the problem.

I found a complete set of custom door trim that I want to install on my none custom cab door, but don't know were to drill holes for the clips. Same thing for the dash trim pieces. Thought about going back to make a pattern of where the holes were but truck is now gone. Can anybody help, its a 65 mo...

I need a rear bumper for my 65 styleside but are there fitment isues with the newer bumpers like the front bumper has . thanks james

I acccidentally discovered you can polish out that white haze that forms on anaodize aluminum side molding. I had just bought a 6 inch buffer/polisher from Harbour Freight and wanted to try polishing something. The only polishing compound I had at the time was for stainless steel, so I put some on t...