is there a part number for a replacement in cab tank out there? can I use a vented tank and have the vent closed off? where would be the best place to purchase one of these tanks? will a stopped up vented cap cause strong fumes inside the cab? a lot of questions but I am wanting to get this fixed AS...

the engine is looking good.. if that ear is broke and not able to grab it you should replace it, but I am sure you know this. the Clifford is an old intake. I ran an Offenhauser C for about 5 years. I ran across the Clifford and the engine builder liked it better. as far as how yours does interstate...

dont go over 60 over on a 300.. going 80 over will put you close to the water jackets.. mine is 60 over and I will get another block if that day comes.. I have a cam for more torque and I run the clifford 6=8 with a 500cfm 2bbl. I use my 300 for pulling and hauling and my daily. I run the 86 EFI spl...

my 66 300 block is 60 over with an 84 head that has been re-worked. the cam was ground for more torque. Power Tech Racing Engines in Ashland KY built it for me. I am running a clifford 6=8 intake with a 500cfm 2 bbl that the engine guy went through and matched to his build. I am running the 86 EFI s...

braking in the driveway is a blessing.. try it half way from wv to kansas.. lol

Looking so forward to this guys!! you all have done a great job with all of this through the pandemic. :) thinking since I havent got to taken hardly any of my vacation this year that we might just try and show up for the cook out and stay all week.. :) just depends on the funds as usual.. but those...

these are AWESOME Blake!! I will be ordering 2 and will see you in Marshalltown in August for them..

did you find a shifter Kid? I think the one I used in the 60 was a Mr Gasket 7667A if you can find one

New Happy Year to all you Slicksters!! I did have the 1st off on Wednesday but just like normal, it was a work week otherwise.. I rang in the new year with the pump for my water burning up so I spent the 1st installing a new pump.. hope my year goes better.. lol have the steering tore apart on my 66...

not yet Pat.. decided to spend the money on the house.. bought a 11KW home generator with transfer switch.. been without power here about 35 hours this last month and winter isn't even close.. I still have the plans to put the dump on it before Slickstock.. :) https://scontent-iad3-1.xx.fbcdn.net/v/...

https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/67878659_2521449144571113_7692313283566501888_n.jpg?_nc_cat=103&_nc_oc=AQn7T658DIx8r5xuAGdT4D3a1fhhg_t3OOZtzPO6UlSqLZrm7k-Bu2KxMXMSbkKHOlg&_nc_ht=scontent-iad3-1.xx&oh=9dd01ca70f893643f9335b6f12e83fb3&oe=5DCBB83C https://scontent-iad3-1....

diff vents are all good.. checked them first.. found one plugged but replaced and cleaned all three...

really looks good in there... and no hitting a broke spring when you hit a bump..

I will look for part numbers FMS would love to find new yokes.. running 90wt gear oil in the rear end and trans case Pat.. they are grooved pretty bad.. I bought a sleeve repair for the rear and it seems to be working, just having trouble getting parts counter to understand what I am looking for... ...

yes I am sure that is where they are leaking.. finding new yokes seems to be the hard part..

Needing advice from experts. I have replaced both front and rear pinion seals. Have also replaced the front seal for the front driveshaft in the transfer case. The transfer case front seal and both Pinion Seals are still leaking. The rear has had a sleeve put on it to try and stop it but it is still...

thanks 04sd, it is an ongoing project not as of right now FMS.. I am looking to hopefully haul about 3 ton of gravel to upkeep my driveway. it wont be an everyday kind of use so hopefully the 60 will do me..

so happy with the way this has turned out.. backyard hillbillies at their finest right here.. :thumright: now to get the bodywork done to the bed, 2 doors sandblasted, worked, guts changed out, (I have them ready) the fenders worked again, and all the little dents out of the hood... Piece of cake, I...

https://scontent-iad3-1.xx.fbcdn.net/v/t1.15752-9/59657080_839790423066769_6017668649676963840_n.jpg?_nc_cat=102&_nc_ht=scontent-iad3-1.xx&oh=d819587606a895a47f6f63def9cc3ad9&oe=5D297F99 https://scontent-iad3-1.xx.fbcdn.net/v/t1.15752-9/59339735_422996248496322_7018009035911725056_n.jpg...

https://scontent-iad3-1.xx.fbcdn.net/v/t1.15752-9/58790292_674315539693843_21986650552795136_n.jpg?_nc_cat=104&_nc_ht=scontent-iad3-1.xx&oh=c8df58d4cb1067afcff866438d48b434&oe=5D2D7F8D https://scontent-iad3-1.xx.fbcdn.net/v/t1.15752-9/59717220_2380737212154076_8098588791444340736_n.jpg?...