My bad on the typo on the thread title..I was in a hurry

Hey I was wondering if the tailgate lower rubber bumpers on the tailgate just used sheet metal screws, and where they are installed, measurements and all. My 64 never had them so I'm wanting to get them installed where they should be. Also my tailgate works great how ever won't shut without using th...

viewtopic.php?f=5&t=10248&hilit=Bronco+fuel+door
Found it..had to get creative on how I searched the forum for it.

looks good!! love the looks of the original dash still in the truck.. love the Bronco cluster also.. that is what I have in my 66... :) https://scontent-iad3-1.xx.fbcdn.net/v/t1.0-9/26731592_1751034964945872_5760399838364160329_n.jpg?oh=7dfb08303a3e98265d7ff7c23cff1989&oe=5AB45D9B looks good! I...

I'm using an 84 Bronco 2 tank and I am thinking along the same lines. I've been hoping to find a junk bronco and cutting out the whole section and working it in. I have not found any with the fill in the back quarter panel. In fact around here I am lucky if I find any Bronco 2's in pieces at all. I...

Hey, a while back I found a thread that listed everything I would need, and showed the steps and what not on installing a car fuel tank in his..66? Anyhow I couldn't bookmark it and haven't found it since. But what's the biggest fuel tank I can install where the spare tire wold be without it hanging...

I had my panel powder coated. Came out great. https://s5.postimg.org/g2jv3nquf/B01158_EE-_EDAA-42_DA-906_C-714474_ABD8_CC.jpg I like the setup you got. ya I follow you on Instagram. looks great. I prefer my chrome look. but yours looks really clean everything's like new. same with the truck very di...

hey guys its been a while hope everyone had a merry Christmas and has a happy new year. Here is my cluster mached up until I get the cluster panel that has no pits in the chrome painted argent silver. The Tach is from tomsbroncos.com its 3 3/8" in diameter. https://storage04.dropshots.com/photo...

Ok, thanks guys, ya I'm having my wondsheild done a second time, it took him 4 times to make it quit leaking and I dont trust rhat he didnt seal the inside by the way he acted..but I will check again...and thanks for the tips. Ill see if I cant get some pictures posted. I found out what my passenger...

Check with your state DMV, I believe you can have a title search done. If rumor is true it has to be done at the main DMV in Topeka when done in Kansas. Local enforcement says National stolen vehicle database drops entry's after 7 years. Local records may linger for years months or forever... just ...

I would say , if you have the title And the vin on the title matches the vin on the frame You should never have a problem ok, ya the data plate and the frame matches with the title. So who can I go through to find out the owner history? Any way to get invoices? It came from the san jose 0lant in Au...

I've been wanting to learn more about the owner history on my 64 f100. I've had the data plate decoded a while ago, and It came from dso-74 on Seattle, WA. I would like to learn the owner history of it, and if possible find out what dealership it came from (I know good luck) I heard that ford burned...

Ok, thanks now I need to find the 76 spindle king pin diameter

check your wiper pivot gaskets.mine were gone and it leaked like a pos.i took them out and seam sealed the pivots to fix my leak. i know my passenger does if I put a hose on it but rhis is very clearly as far as I can tell coming from the corner seam under the dash all the way over thw harness plug...

Hey guys, Ive been trying to seal up my 64 f100 for a while and I'm closer but it still has some leaks. My driverside seems to have been leaking from the seam under the dash that on the outside is under the cowl vent, I seem to have stopped it by temporarily siliconing a seem on rhe outside-I know.....

I used plain steel 3/8" thick mild steel. I have a cardboard template of my brackets. I'll bring you one to SS. But the odds of a half ton disk having the same outer diameter and the caliper you chose having the same offset and bracket bolt pattern is almost 0 Outside rotor diameter was 12.5&q...

So today I decided to remove the screwed in sheet metal on the floor of the cab. ARRG, worse that I expected here. Left side: https://s20.postimg.org/hhvzxbj25/IMG_1939.jpg Rotted completely through at the cab mounts. Bolt for the cab mount fell out the bottom when I touched it. Right side: https:/...

ABSOULTLY, If ITS IN ANY WAY SAVABLE...I would make sure the door isnt rubbing the fender and if it is adjust it out..or worst case senerio bang it out until it isn't primer it, and drive on until you can fix the door or find a replacement...TBH I have two almost dent free doors (Drivers and passeng...

wait the title says t5 did you Install a t5?

I still need to double check my rear end ratio but My 64 f100 with a fresh 292 y block, and BW T98 4spd , with what I'm pretty sure is 3.25 rear gears. I shift from 2nd to 3rd at 10-15 just cruising around not speed shifting, and 3rd to 4th @ 27-30 mph just cruising around not speed shifting. and at...