Super glue works well in this application..

I put my tailgate and homemade roll pan on this morning... Still need to put the emblem on the gate, trying to decide on the black or silver one from DC. http://i906.photobucket.com/albums/ac268/loosrp/p1.jpg Also cleaned her up a bit.... Almost to the "done" stage!! At least thats what I ...

You will get better fuel economy with a vacuum advance unit for sure. All out performance (racing, off road) engines you generally run a locked out dist. and a timing retard module to get it started.

Looks real nice!!

I would coil any lines going from the cab to the frame, think about all the flex between the two....

Has anyone installed under hood isulation? Do you have any pictures? What did you use? I've found a few self adhesive products And some fiberglass mat, just looking to put some deadner on to settle down the vibrations and a heat sheild of sort to keep the heat from affecting it. Any ideas are welcom...

That trucks not even close to a RR..... Get you bud to touch it up for you, shit happens all the time.

Nice looking ride!! Liking the white/grey paint scheme, very nicely done!

Hood looks really nice, how many coats of the Rustoleum did you use? BTW I was looking at you rear brakes and noticed the shoes are on backwards, the short ones go in front (primary) and longer ones trail (secondary). Just an FYI
Russ

Using a double Jointed coupler will solve any alignment issues.
I purchased one thru Flaming River, call them, they'll hook you up.

Yeah I tried following the tutorial and it didn't work well for me either
I figured out the hard way the felts go on before the glass run cannel is
seated. Not a very good tutorial IMO.

Great tip!!

To be honest, I just spent the big bucks on the Capenter's kit and wasn't impressed at all..... The division bars were very cheaply made, the only parts that I liked were the vent window rubber. Carpenter makes great rubber seals, the rest is the same as everyone else's, if you get my drift...

Nice work, did you score the AC at the Springfield swapmeet?
Russ

Jeff, Same harness I used. I mounted the fuse block facing down using a L bracket under the dash just left of the steering column. I also used the existing factory large round rubber grommet to feed the wires thru the firewall, looks nice. I was able to pin out all the origonal switches easily for r...

Haven't bought to much from them but the defroster hose kit blows. The kit consits of corrigated black pvc hose that you buy for downspouts on the house, way to stiff, useless.

Very nice work

Looks real nice! How does the turn signal lever work with that new no offset steering wheel? Did you bend it or was there plenty of room?

You can get one in there and it will kick the bottom of the door out and the top in, it won't take much.

I had the same problem- Had to put shims under the lower hinge where it bolts to the door.
Russ