What type of mid to late 70's trans is a 4 speed manual with 4th gear being the overdrive gear ? It's from a 78 F150 and I need a drive shaft for my C6 automatic and I'm hoping the yoke is the same , I found this manual trans online , but have not seen photos yet.

Hood should be the same for a 64 , not installed yet. I ordered it from O'Reilly's $239 plus tax and it's gloss black powder coated. It looks awesome ! Here's the link http://www.oreillyauto.com/site/c/detail/MHT0/436002.oap?ck=Search_radiator_1123041_3335&keyword=radiator I just called the stor...

Nice pictures ! My measurements were correct , Thanks for posting

We all appreciate your time and effort it takes to keep this site going , I get nervous when the site goes down. This is my life line for information and questions about my trucks.

Welcome from Michigan and a 66 F100 2WD owner also

For $3 K that truck should have no rot with an engine/ trans that runs , I totally agree with everyone else ...way too high !

Take your time searching , there are nice trucks out there for $3000 or less ......that's my two cents

Nice rolling chassis , he's a tip to make your photos larger How to make your pictures large size your Photobucket account has been set to automatically resize photos on upload. There is a link that says "Customize your upload options Upload to Photobucket" after you click the upload butto...

A guy hold a mosquito fogging machine ?

L #42664

the problem is the 5/16 has to somehow connect to the 3/8 coming from the Holley Carb , I can swap out that 5/16 for 3/8 , but I don't want to lose fuel pressure

This is a picture of the Holley fuel line which is 3/8

My ( top edge of emblem ) sets 1 " 3/4 down from the top edge of the fender and 1 inch in from the edge of the door is where my emblem ( side edge ) starts. I'm a 66 also hopefully that makes sense and hopefully those are the factory holes

Manual fuel pump has 3/8 hose fitting ( inlet ) from the fuel tank and a 5/16 ( outlet ) fitting / removable line going to the carb. I have a 3/8 hard line coming off the Holley 750 double pumper. ( A ) Is there some kinda of reducer to use to connect 3/8 hose to 5/16 hose ? ( B ) Is there a reason ...

That's a " BIG NO " on the air cleaner , it's just to cover the carb while the engine is being assembled. I'm leaning towards a repop steel 50's bat wing air cleaner.

Almost ready to go under the hood 460 bored .30 , Edelbrock Performer Intake , Headers , Holley 750 Double Pumper , Duraspark Dist / MSD 6AL Ignition Box / MSD Blaster 2 coil and a Holley fuel pump have been ordered along with braided lines. http://i174.photobucket.com/albums/w94/RBUPSMAN/100_3891.j...

Post a picture and give us the details

I have 66 F100 2wd core support , I have a 1976 460 going in the truck and this radiator measurements are the same. When I typed in 66 352 the same radiator part # came up for both the 76 460 and the 66 352. I will order it tomorrow and post how well it fits.

What type of electronic distributor do I have and what should I plug into it ? Bought this 1976 460 and need advise on the best ignition box match for this distributor and other parts I may need to go with it. Thanks ! http://i174.photobucket.com/albums/w94/RBUPSMAN/420956_3504430978397_1417637094_n...

It's not the most dependable and longest lasting full size truck on the grass , that for sure !