Sure, I will take it.... Let me know how much and where to send the check. Thanks

The gear on the inside of the trans will only go on one way, There is a small notch in the gear that lines up with a small bearing. so, there is no way it can be backwards.

This is a three speeds manual trans with the cable in the left side of the trans.

Oh, one more question...... I had 15 " tires on originally, Now I have 16" tires the drive gear was a 17 tooth, the driven gear was a 6 tooth ( inside the trans) would I want to step up to a 19-22 drive gear to balance out the speed ratio with 16 " tires v/s 15" ? Not sure how I ...

I need to understand this prior to ordering this again. so it's the drive gear at the end of my cable that could be a right or left?

The 6 tooth driven gear inside trans are only one direction correct?

Well, first of all Rick from your post I'm located in Grand Rapids, Mi. The second post, here... when I took out the driven gear inside my trans it was a 6 tooth, the only thing I didn't pay attention too is if it was a left hand or a right hand. But the one I got from Mac's lined right up and I tho...

Thanks for the input here fellows...... But I dont see anything in the Dennis Carpenter catalog as far as a 1963 speedo gear?

Really not sure what do from here?

Well, The original one I took out was a 6 tooth and thats what I put back in it, However, it didn't show that it was for a 1963, but it did fit right up in the tail piece, and it did look the same. So I guess I'm not for sure for sure it's the same. But it looks right?

Okay, I have replaced the speedo cable, driven gear in trans, drive gear at the end of the cable, Still inop: Here is one thing I'm not really sure about, the speedo cable when we put the plastic gear on the end of it with that small clip, you can feel it bind up a little, It is almost the cable sho...

Thank You... I will give this a try

Well, I'm to the point of giving up on the steering box issue. Can anyone tell me where the best place is to get another one. I see LMC has one for around 430.00 I think I'm just going to order another one. Any help finding the best place to get one I would really appreciate it.

Well, I found the bearing on the right rear was what the problem was. It wasn't leaking any oil as yet, but man did that wheel have the play in it. I bet I could move that wheel up and down at least an 1' - 1 1/2 slop. I'm just happy I found the problem.

Thanks guys for the advise.

put the cover back on it and put it away for a another rainy day... And wait for my savings to build back up a little to work on the money pit....

Okay, sounds good, I will try that as soon as it stops raining here in West Michigan..... Sure appreciate the help guys.

If its not the axle bearings, I have a set now from LMC that I will sell pretty cheap! LOL

Okay, thanks..... I will take your advise and jack it up first and check for any movement. If I don't seem to have any movement.... or any so called rough spots while I'm turn the hub...What else should i be looking for to find this noise?

Why would it leak by the bearings? is it because it gets too hot and breaks down the seal by the bearing?

I have a noise in the rear axle area and it gets louder the longer I drive it. It seems to get a little louder the warmer it gets. When I put the truck back together I took the cover off the rear end and inspected the pig, It look to me like it was brand new inside. The oil was pretty dirty but the ...

This may be a trick to some that's just common knowledge too however, I had told a guy about this and he was very pleased with the end results as I was. Door alignment after painting the vehicle. This can be a difficult task an nerve racking after your cab is painted and your ready to hang your door...

I know with mine I had painted all the panels off the vehicle. I had a few issues as well on color match only because of air pressure, more or less coats of paint and or clear applications. The bottom line is today paints have so many different variations that even though its the same paint code bei...

What can't you get to match? I mean like what Panels? are you trying to panel paint off the vehicle or what?
Let me know more of what the issue is I can help....

Thanks guys, I will try to look up that procedure and try to adjust myself one more time before sending off the pros.

Thanks for your response it will really help!