Did Ford use any 16 x 8 8 lug wheels?
What years?
Thank y’all

Yes
55 mph around 1950 rpms in fourth gear direct.
70 mph around 1950 in fourth gear direct.
I think I am going to go with 285/75 R 16 tires on 8” rims.
I think they will be easier to put on a full floating axle.
I appreciate y’alls input.

I have one like the one pictured above on my 66.
I purchased from a member here.
They come up on eBay.
It fits perfect is stout and has 1” braces that go through the core support to the frame.

This would be for the rear.
Fronts are 235/85 R 16
I want something that will fill the wheel wells but not rub.
I have 7” inch rims now and would like to run 10” on the rear.
I have a 4.10 rear end but I have purchased a 3.54.
33” tires should put RPM’s around 1950 at 70 mph

Is anyone running 305/70 tires on 10” wheels?
Any rubbing?
What back spacing?
Thank you!

Just made these beam brackets for a customers lake house.

Thank you for the info.
Cummins pump is from tater chip truck that had hydroboost.
I am using a reservoir with dual returns and a filter.
I have a power steering cooler from a f650 plumed into the steering return.
Still have lots to do before I can drive it.

I have a remote reservoir ( 5000 Ford tractor) with dual returns. I have a industrial place in town that will make hydraulic lines. I am using the cummins power steering pump.

Got hydraboost mounted today. I cut mounting ring from F-450 mount and welded to plate that fits clutch/brake pedal bracket. Still have to plumb and make brake lines. https://s19.postimg.org/7uo8clqlr/IMG_3401.jpg https://s19.postimg.org/4cc8g7ppr/IMG_3402.jpg https://s19.postimg.org/hcjdywmwf/IMG_3...

Thank You!
Cummins 4BT
Will be straight piped.
I am using the Borg Warner 4-speed that was in the step van.
I also have a Watson 3 speed auxiliary that I will be using.

https://youtu.be/LDbQAVpvjvo

exhaust
https://youtu.be/oMoB1k3oEug

I have about twelve weeks in this project. It is a steel tree 13' tall. 1600 lbs with 300 forged leaves. https://s3.postimg.org/6w1sbipr3/IMG_3335.jpg https://s3.postimg.org/za77vedb3/IMG_3336.jpg https://s3.postimg.org/iay9g523j/IMG_3338.jpg https://s3.postimg.org/b90btxyhr/IMG_3339.jpg https://s3....

Thank you very much!
This is what I needed to know

Engine is laying under the barn shed. Engine is a 300 from a 66 F250. Cam broke and punched hole in block. Timing indicator is from a mid 70's engine. The earlier engines used the marks on the cover that are opposite where the indicator is located. If you can use indicator pm me your address and I w...

I have wanted a receiver on the front of my truck for a good while.
Built one today.

Thank You!

is this what you need?

Is it possible to add pictures to forum without using photobucket or any third party server

I will have to have hoses made for the power steering swap.
Steering sector is from a 73 f250.
Would any of you know the fitting size,type and thread count?