Pat: The stuff pasted in below was copied off the Weather Canada webpage, maybe it will make you feel better about your current conditions:) Extreme Cold Warning Alerts for: City of Edmonton - St. Albert - Sherwood Park Warnings 6:27 AM MST Sunday 07 February 2021 Extreme Cold Warning in effect for:...

Tom: The guy with the Uni B-100 is Solomon Lunger, he writes for, (IIRC), Street Trucks Magazine, which also produces the F100 Builders Guides........

Here's a vid on the B-100

https://www.youtube.com/watch?v=AU9rog7OOqE


and here's his Youtube channel

https://www.youtube.com/c/FordEra/videos

it's too bad you're not looking for a rear diff, I have a Dana 60 from a '77 f250, and it's a 3:07, but wrong end of truck, and wrong side of the border as well....

James

Crappiest Listing (by Auctioneer) that I've seen, the amount of vehicles in the pics vs the sparse list is laughable, and will cost the family $$, cuzz people won't come if they're not even aware that something they seek is there. The 1965 F100 is a custom Cab, with the killer 240:) It was the only ...

**You didn't mention if this is for a Flareside, or a Styleside?? Below is assuming Styleside: Supposedly, the Bronco tail lights share the same shape, and if you go a year or two newer, they also have a backup light included. That is a positive, provided you don't mind adding the backup switch and ...

SO, watched a vid of the 2020 Australian Drag Challenge (Their version of Drag Week), and spotted a Slick 60's member's Car Hauler in the background. Then started looking to see if his Falcon (or is it a Comet?, been a while since I saw it on here) would show up, no luck, but this vid is only Part 1...

Pat: Did that bag that DEER near a Nuclear facility??

I have recollections of one of the lads on FTE (Ford Truck Enthusiasts) forums having a run done, but you'd have to go over there & do some recon.........

https://www.ford-trucks.com/forums/forum40/

https://www.ford-trucks.com/forums/sear ... d=31015066

Yup, the forward location, which looks easy enough to view in the pic below (from FORDIFICATION) But it can be a PITA when all the sheetmetal is still there:) On my '66, it was basically directly under the lower edge of the inner fenders, took some scouting to find it, and some sandpaper before I wa...

I know one local lad with a Mercury Bumpside (Styleside LWB). He has the same bumper as in the pic above, but it's been notched on the ends and tucked a bit tighter. It looks good. The downside to this is the leading edge of the center portion, above where the license plate is, is now perilously clo...

While I have seen some roll pans that looked good, I don't see myself ever going that route, as even a simple blunder by the person parked across from you while they're backing out could result in substantial damage to a Styleside box without a bumper to protect it........ So, no roll pans, or runni...

The product is called liquid butyl windshield sealer , but a pint is over $20.00, and it is typically put into a small pump handle type oil can, then pumped into the joint. Do a google search using the bolded words above, you'll get plenty of hits. I would normally just paste in my goodle search, bu...

When theastronaut posted the build of his customer's '66 CC SWB, I remember him mentioning the windshield gasket and many other rubber bits for the glass came from Precision, here's a link, set up form 1966 F-100, but it's easy enough to change using the dropdowns at the top of the page..... https:/...

It's been done, but on the straight axle slicks, there are no later model factory parts to bolt it into your chassis (twin I beam slicks can use Dentside engine mounts), however, the aftermarket has been building a weld in crossmember for years to bolt 429/460 into the straight axle trucks. https://...

Tom, you made me curious, so I had to go look:) These two are all I found on their webpage.....not much to go by, but it looks like an honest survivor...... https://cdn.aarp.net/content/dam/aarp/entertainment/celebrities/2020/08/1140-kevin-costner-portrait.imgcache.rev98e1d0cfcc802ffbe2fdcbb73b6b188...

Chris: The intermittent wiper bits and pieces (module and switch) from any Ford Truck 1973 up to 1989 can be made to work, but on some of the later ones, the shaft on the switch will need to be shortened to use your original knob.

http://www.fordification.com/tech/wiperdelay.htm

Saw this meme in a post on bangshift.com, even though it's a bump, I'm still posting it here:)




And here's the original post....

https://bangshift.com/general-news/happ ... shift-com/

Never 100% sure, as some of the colors changed year to year, or were renamed, but that '62 looks like Marlin Blue to me?

Here's one build thread that started as LWB 2WD, and ended as SWB 4WD http://www.slick60s.com/viewtopic.php?f=32&t=37749 And theres some good stuff in the links withing this post http://www.slick60s.com/viewtopic.php?f=1&t=34905&p=292640&hilit=Lyle+Vaas#p292640 there are more threads...

Any local Spring Shop should have center bolts & u-bolts, or can certainly get them:)