thanks for the reply , only problem is I don't have a transmission for a 352 and the one I have for a 6 cyl is still in the truck. Why I wanted to know is if they are the same I will put the 6 cyl trans into another truck that has a 352 with auto in it . Thanks , Tom

Is the 3 speed Transmission in a 65 F100 6cyl the same as a 352 3 speed. Thanks, Tom

when backing up put it in second before putting it in first and it will go in smoothly while you are still rolling backwards. Tom

I'm working on a 75 bed floor now but I'm still in the process of cleaning it up before I attemp to put it in my 66. I cut away all the sheet metal from the floor but left all the angle iron on the bottom except the very last one near the tailgate so far it's going OK I'll post some pictures in the ...

I'm on board

Tom, Monroe NJ

I beleive it should be loose ,So if you shook it , it would rattle. It shouldn't be positive spring force . Sounds OK. Tom

I have a 74 F 150 2 wheel drive and I was thinking about putting the 66 F100 2 wheel drive sheet metal on it instead of swapping the disc brakes and the power steering. Would that work ? I was planing on pulling the cab and bed off the 66 to restore it anyhow and the cab is already off the 74 [used ...

The top front connection has 5/16 metal tubing connected to it and is painted blue like the trans and it doesn't look like after market stuff because the bend is a very tight 90 degree and couldn't be done without special equipment. There is no trans cooler on the bottom of rad. and the original tra...

I have HD COM trans and the PO installed a after market trans cooler in front of the rad and I was wondering if it was done right. There are 3 fluid connections on the trans, 1 near the top and 1 near the bottom front passenger side and 1 in the rear. The PO has a tee near the rear connection and it...

look at last picture of where the gas tank door is. pretty neat. I wonder what that came off. Tom

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 715&rd=1,1

If you can afford it go for it but it is probably not needed but you won't have to worry about points anymore. That's a nice looking distributor. Tom

I'm about to buy a set to , thanks for the info. Do you think I really need them?

http://s40.photobucket.com/albums/e226/ ... IM1325.jpg