Who makes it?

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Kid, Casey 65

Post Reply
64 f100
Posts: 2754
Joined: July 18, 2006, 7:23 am
Location: Carmi, Illinois, 62821

Who makes it?

Post by 64 f100 »

I know I've seen a repair piece for the front of a styleside bed, made to replace the bottom part of the front panel . The piece that seems to rot out on all these trucks. I can't seem to find it in any of my catalogs. Will be calling Tom at Flashback this morning to se if he has it, if he doesn't then I still will need the information. New parts are coming out all the time for these trucks , I will someone would make the front support and repair pieces for the flat corners. The whole front panel would be nice also.

Rich
64 f100
Posts: 2754
Joined: July 18, 2006, 7:23 am
Location: Carmi, Illinois, 62821

Re: Who makes it?

Post by 64 f100 »

sOk, I give up. Can't seem to find this piece anywhere. I may have had a brain fart, and was thinking of the patch panel for a flareside bed.

Rich
1961 F350
1964 Galaxie convertable
1964 flairside, style side, and longbed
1965 Ranger, and shortbed
1966 long bed, and shortbed
A few parts trucks also
1991 Capri
2011 F250
2004 Lexus
kelwar
Posts: 48
Joined: July 10, 2011, 8:55 pm

Re: Who makes it?

Post by kelwar »

Some one makes it but I believe it's listed for a bronco if that helps
64 f100
Posts: 2754
Joined: July 18, 2006, 7:23 am
Location: Carmi, Illinois, 62821

Re: Who makes it?

Post by 64 f100 »

kelwar wrote:Some one makes it but I believe it's listed for a bronco if that helps


If you remember where you saw it, or think you saw it, please post. Although, I know where this would be used on a bronco, do you?

Rich
1961 F350
1964 Galaxie convertable
1964 flairside, style side, and longbed
1965 Ranger, and shortbed
1966 long bed, and shortbed
A few parts trucks also
1991 Capri
2011 F250
2004 Lexus
User avatar
olliesshop
Posts: 737
Joined: May 16, 2010, 8:38 am
Location: Grosse Pointe, Michigan (Detroit Metro)
Contact:
United States of America

Re: Who makes it?

Post by olliesshop »

Probably too late, but I could find one either so we're having to fab one up. On mine the very bottom 1/4" or so has holes in it. Hopefully it will be done in a week or so. BTW, the portion right behind the front panel is a completely rebuilt Torque Box, which was completely rusted out.

Image
Tim - 1961 F250 Uni
"Big Red" pictures ... http://olliesshop.smugmug.com/Trucks
Current build thread ... viewtopic.php?f=32&t=29505
pcola60
Posts: 32
Joined: March 23, 2012, 11:24 am
Location: Pensacola Fl.
United States of America

Re: Who makes it?

Post by pcola60 »

I used the hole bed floor and vertical front panel from a Chevy truck bed I got cheap . Fenders were bent up but the floor was nice. Cut the back of the cab under the belt and installed the front panel and floor. Look like it came that way from Ford.
Post Reply