Smallblock clutch linkage
-
- Posts: 499
- Joined: July 25, 2006, 8:44 pm
- Location: Dayton Ohio
Smallblock clutch linkage
I am thinking about taking the 460/C-6 out of my 66 and installing a 302 and 4 speed toploader back down in it,I know the windsor motors were never installed in those trucks from the factory so if I decide to do this so will the 67 to 72 smallblock parts work.
Re: Smallblock clutch linkage
if our talking about the z bar. i oud get the 67 stuff and tweak it. honestly it a tube with 2] 1/4 inch bent bars not much to it just time consuming. get pics for reference. headers will make it more of a issue.
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
Re: Smallblock clutch linkage
you will need parts from the 69-72 truck.
the 6 and 302 use a screw in ball on the side of the block. all the others have a bracket with the ball mounted to it.
not sure if you need to move the frame bracket some or not.
look at lower left corner
the 6 and 302 use a screw in ball on the side of the block. all the others have a bracket with the ball mounted to it.
not sure if you need to move the frame bracket some or not.
look at lower left corner
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
-
- Posts: 499
- Joined: July 25, 2006, 8:44 pm
- Location: Dayton Ohio
Re: Smallblock clutch linkage
I should have all the original clutch parts but they are for a FE but was curious about the Z bar.
-
- Posts: 612
- Joined: July 28, 2006, 8:31 pm
- Location: Monroe NJ
Re: Smallblock clutch linkage
1966 F250 Camper Special parts truck
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
-
- Posts: 499
- Joined: July 25, 2006, 8:44 pm
- Location: Dayton Ohio
Re: Smallblock clutch linkage
I need to look in the shed and see what i done with the parts i took off 5 years ago,probably would be easier to go to the junkyard and get other parts.