clear turn signal lense for a 66?

[shocker998md]

I haven't found any yet. So I went down to lowes and picked up a sheet of overhead light plastic. It's thin but so far I made one. I'll try again tomorrow to make another, I'm using masking tape and a fine tooth jigsaw and it's working ok. Anyone do anything like this or did I not search enough for some new lenses?

[ICEMAN6166]

far as i know and i have taken apart lots of trucks 65-66 only had amber lenses

[Leeroy]

Our ones had white, I figured it was some stupid Australian design rule trying to be more 'safe'
Please let me know if you find a source!!

Ice what about the slicks that had the additional turn signals out front of the guard? I thought they may have been white? Could be bad memory though.

[shocker998md]

I'll post pics tonight. Had to make them. I think they look great.

[6166 Junkyard Dog]

Brian like me have taken so many apart,, I have found clear lens BUT Only because the sun faded them since when I took the bezel off, the amber was there clearly

[Leeroy]

Found em!
http://www.ebay.com.au/itm/like/2516249 ... 107&chn=ps

We don't make anything in Australia, so these will be imported SOMEWHERE from the US.

I don't know if Bronco's fit, but these are a bit closer to home (And MUCH cheaper!!!)

http://www.wildhorses4x4.com/product/Fr ... ont_Lights

[shocker998md]

Finally got a picture. I'll take another once it's all together. For 5$ and an hour of my time I think it will work.

[Toyz]

http://www.lmctruck.com/icatalog/fb/full.aspx?Page=83
Paul