I've ran into this problem a couple of times. I cannot find a listing for this bumper as it is different from what is advertised. Should be available from somewhere. The bumper is round with a male part on the back that fits into a bracket. All I can find are the ones shaped like an arrowhead . Closest I've seen are for the later trucks but are not thick enough. Any suggestions on where to find this part?
Rich
65 clutch bumper
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
Re: 65 clutch bumper
Rich
i was looking thru one of the miscellaneous catalogs at work and found several different ones including some tiny ones for the ashtray
ill see if i can find out whose they were and post a #
i was looking thru one of the miscellaneous catalogs at work and found several different ones including some tiny ones for the ashtray
ill see if i can find out whose they were and post a #
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Re: 65 clutch bumper
Thanks Ice, I've got a used one in good condition I have pictures of If you want me to send you picture.
Rich
Rich
1961 F350
1964 Galaxie convertable
1964 flairside, style side, and longbed
1965 Ranger, and shortbed
1966 long bed, and shortbed
A few parts trucks also
1991 Capri
2011 F250
2004 Lexus
1964 Galaxie convertable
1964 flairside, style side, and longbed
1965 Ranger, and shortbed
1966 long bed, and shortbed
A few parts trucks also
1991 Capri
2011 F250
2004 Lexus
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
Re: 65 clutch bumper
Rich
a pic would be good or at least a dimension
i looked thru one book today, AUVECO, but only found the glovebox rubbers and a lot of GM pieces
it was not their full catalog, heres there website
https://www.auveco.com/
not sure if this will work, theres a few of what i saw
http://www.auveco.com/OnlineCatalog/ind ... #?page=774
a pic would be good or at least a dimension
i looked thru one book today, AUVECO, but only found the glovebox rubbers and a lot of GM pieces
it was not their full catalog, heres there website
https://www.auveco.com/
not sure if this will work, theres a few of what i saw
http://www.auveco.com/OnlineCatalog/ind ... #?page=774
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
- unibody madness
- Posts: 2140
- Joined: December 4, 2008, 4:33 pm
- Location: Paradise,CALIFORNIA 95969
Re: 65 clutch bumper
goo to know
Turk build thread at:
viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!