seat belts in slick crew

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Kid, Casey 65

Post Reply
65 crewcab
Posts: 20
Joined: December 6, 2014, 5:43 pm
Location: wyoming
United States of America

seat belts in slick crew

Post by 65 crewcab »

how do you get the anchor point in between the doors with out cutting a major hole.or cutting the welds
1966 crewcab
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Re: seat belts in slick crew

Post by Alan Mclennan »

Have you got a photo we could look at 65 ?
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
65 crewcab
Posts: 20
Joined: December 6, 2014, 5:43 pm
Location: wyoming
United States of America

Re: seat belts in slick crew

Post by 65 crewcab »

have to get one tomorrow then figure out how to post it
1966 crewcab
User avatar
FarmMotorSports
Posts: 431
Joined: November 13, 2010, 6:55 pm
Location: KS, Lawrence
United States of America

Re: seat belts in slick crew

Post by FarmMotorSports »

Can it be lowered from the headliner area in to position?
61 F250 Unibody
5.9 Ford Diesel / Allison
Disk brake straight axle
65 crewcab
Posts: 20
Joined: December 6, 2014, 5:43 pm
Location: wyoming
United States of America

Re: seat belts in slick crew

Post by 65 crewcab »

That is closed in solid on the top can come in above the head liner in the back seat. was not wanting to drill out the pop rivets. But might be only way

the wall between the doors http://s1175.photobucket.com/user/65cre ... r.jpg.html

http://s1175.photobucket.com/user/65cre ... a.jpg.html


_

http://s1175.photobucket.com/user/65cre ... 4.jpg.html


could not get to post pics but could links
1966 crewcab
User avatar
Alan Mclennan
Posts: 9324
Joined: October 14, 2006, 6:16 pm
Location: In the shed... Cranebrook NSW
Australia

Re: seat belts in slick crew

Post by Alan Mclennan »

here you go 65, might need something a bit more sturdy than those pop rivets tho


Image
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"

Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8.............................. cry.gif
65 crewcab
Posts: 20
Joined: December 6, 2014, 5:43 pm
Location: wyoming
United States of America

Re: seat belts in slick crew

Post by 65 crewcab »

Thanks Allen. It is welded on the back side of the panel. I would be happy with just a lap belt but wife wants shoulder belts.
1966 crewcab
User avatar
PFM-64f100
Posts: 1270
Joined: August 7, 2006, 6:37 pm
Location: Haslet, Texas
Contact:

Re: seat belts in slick crew

Post by PFM-64f100 »

This is how I did mine. Drilled a hole in the flat plate then welded a nut onto the back of it. Then I used some pop rivets to hold it on there. Not the best but figured it would slow me down for now.

I do have plans on redoing it by making a horizontal cut in the middle (location behind the current plate) then sliding the plate inside then reattaching the plate with the current pop rivets holes. This way it will be pulling on the complete panel and not just the rivets.

Image

Image

Image

Wish I had more photos but looks like they got lost with the HD crash a while back. Dang HDs. :)
64 F100 short bed-style side-460-c6-with side toolbox and Dakota Front Suspension
And a 65 CrewCab

Chris W.

The pickups
65 Crew Cab
http://www.purpleflyingmonkey.com/CrewCab/index.html
64 F100
http://www.purpleflyingmonkey.com/1964- ... index.html
The Torino project http://www.purpleflyingmonkey.com/1971- ... eFile.html
65 crewcab
Posts: 20
Joined: December 6, 2014, 5:43 pm
Location: wyoming
United States of America

Re: seat belts in slick crew

Post by 65 crewcab »

Thanks for the reply and pics PFM. Was thinking of drilling the rivets out to gain access. Then putting them back in then adding a weld between each rivet.
1966 crewcab
orangeRcode
Posts: 838
Joined: August 2, 2014, 10:38 pm
Location: Mustang, OK
United States of America

Re: seat belts in slick crew

Post by orangeRcode »

PFM-64f100 wrote:This is how I did mine. Drilled a hole in the flat plate then welded a nut onto the back of it. Then I used some pop rivets to hold it on there. Not the best but figured it would slow me down for now.

I do have plans on redoing it by making a horizontal cut in the middle (location behind the current plate) then sliding the plate inside then reattaching the plate with the current pop rivets holes. This way it will be pulling on the complete panel and not just the rivets.

Image

Wish I had more photos but looks like they got lost with the HD crash a while back. Dang HDs. :)


Where did you source the seat belts?
User avatar
PFM-64f100
Posts: 1270
Joined: August 7, 2006, 6:37 pm
Location: Haslet, Texas
Contact:

Re: seat belts in slick crew

Post by PFM-64f100 »

orangeRcode wrote:
PFM-64f100 wrote:This is how I did mine. Drilled a hole in the flat plate then welded a nut onto the back of it. Then I used some pop rivets to hold it on there. Not the best but figured it would slow me down for now.

I do have plans on redoing it by making a horizontal cut in the middle (location behind the current plate) then sliding the plate inside then reattaching the plate with the current pop rivets holes. This way it will be pulling on the complete panel and not just the rivets.

Image

Wish I had more photos but looks like they got lost with the HD crash a while back. Dang HDs. :)


Where did you source the seat belts?


Some place in Oklahoma I think. seat belts plus maybe. It has been a number of years sorry.
64 F100 short bed-style side-460-c6-with side toolbox and Dakota Front Suspension
And a 65 CrewCab

Chris W.

The pickups
65 Crew Cab
http://www.purpleflyingmonkey.com/CrewCab/index.html
64 F100
http://www.purpleflyingmonkey.com/1964- ... index.html
The Torino project http://www.purpleflyingmonkey.com/1971- ... eFile.html
65 crewcab
Posts: 20
Joined: December 6, 2014, 5:43 pm
Location: wyoming
United States of America

Re: seat belts in slick crew

Post by 65 crewcab »

Did a search for shoulder belts
1966 crewcab
Post Reply