Humbly requesting assistance. I need the following thread pitches.
Nuts for cab mounts: I need the pitch for these mount nuts. Also washer size too.
Bolts for engine to trans- for mounting to engine stand
Bolts for hood hinge (hinge to hood)
Door hinge to body bolts
I think that's it for now.
Thanks in advance.
Thread pitch sizes needed!
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
Re: Thread pitch sizes needed!
cab mounts and engine to trans are 7\16"
all engine to bell are coarse 7\16 -14
depending on year the cab could be coarse or fine
hood and door are 3\8" again depending on year could be fine or coarse, 65-66 are coarse
best look at the threads to be sure
all engine to bell are coarse 7\16 -14
depending on year the cab could be coarse or fine
hood and door are 3\8" again depending on year could be fine or coarse, 65-66 are coarse
best look at the threads to be sure
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Re: Thread pitch sizes needed!
ICEMAN6166 wrote:cab mounts and engine to trans are 7\16"
all engine to bell are coarse 7\16 -14
depending on year the cab could be coarse or fine
hood and door are 3\8" again depending on year could be fine or coarse, 65-66 are coarse
best look at the threads to be sure
Thanks!!!
Re: Thread pitch sizes needed!
I need the bolt lengths and pitch for the waterpump bolts (302 engine) if anyone knows.
Re: Thread pitch sizes needed!
Lengths are dependent on pump application as well as accessories. Cap screws size is 5/16"-18.
Sorry to be so little help, but even ARP trends to not always "get it right" with their kits!
Paul
Sorry to be so little help, but even ARP trends to not always "get it right" with their kits!
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul