Thread pitch sizes needed!

[RRTEC]

Humbly requesting assistance. I need the following thread pitches.

Nuts for cab mounts: I need the pitch for these mount nuts. Also washer size too.
Bolts for engine to trans- for mounting to engine stand
Bolts for hood hinge (hinge to hood)
Door hinge to body bolts

I think that's it for now.

Thanks in advance.

[ICEMAN6166]

cab mounts and engine to trans are 7\16"
all engine to bell are coarse 7\16 -14
depending on year the cab could be coarse or fine
hood and door are 3\8" again depending on year could be fine or coarse, 65-66 are coarse
best look at the threads to be sure

[RRTEC]

cab mounts and engine to trans are 7\16"
all engine to bell are coarse 7\16 -14
depending on year the cab could be coarse or fine
hood and door are 3\8" again depending on year could be fine or coarse, 65-66 are coarse
best look at the threads to be sure

Thanks!!!

[RRTEC]

I need the bolt lengths and pitch for the waterpump bolts (302 engine) if anyone knows.

[Toyz]

Lengths are dependent on pump application as well as accessories. Cap screws size is 5/16"-18.
Sorry to be so little help, but even ARP trends to not always "get it right" with their kits!
Paul