What are these?

[9Fingers]

I decided to remove the tank and go ahead and pull the cab off for frame work and drive line reinstallation ease. After I pulled the gas tank out, I noticed trash at the lower portion of the cab in the corners and behind the tank area. I found three metal pieces. I can see that two are for covering an access hole in the upper kick panel on each side of the cab. The one piece that is different, however, I can't seem to remember seeing anything like it. Photos below. Thanks in advance.

[MN66]

They are door hinge cover plates and the access hole covers for your fender bolts.


I should have read your comment instead of posting what you already knew...
You should see rectangular holes in each kick panel above the vents and toward the door frame.

[9Fingers]

Thanks again MN66! I found them hiding behind the custom cab inserts on the door after you told me what they are.