Air Conditioning
-
- Posts: 579
- Joined: December 31, 2009, 5:26 pm
- Location: Saint George Utah
Air Conditioning
Has anyone installed the Vintage Air unit that is supposed to be a direct fit for our original heater assembly? I like the idea of electric servos for the heat control and blend door. Thanks.
William-in-St. George
- aj64f100390-292
- Posts: 228
- Joined: November 28, 2016, 11:57 pm
- Location: South West Missouri
Re: Air Conditioning
I haven't but I want to hear and see how some of the kits out there turn out...what bothers me is that none of the kits I've looked at offer stock looking knobs...thats somthing I'll probably do along with a few other things to one of these kits..
Last edited by aj64f100390-292 on July 1, 2018, 2:03 pm, edited 1 time in total.
1964 f100 lwb 292 ECG Heads,4v, 4spd, '76 9" 3.25, orig. :292 3spdO/D, 3.92 spicer locker
19mpg hwy, .040/298ci, arnd 8.7:1, ECG heads, stainless valves, ceramic coated ramshorn manifolds, B code int., eddy 4bbl, Durasprk II/C5ZF dizzy, C2AE rods,high ratio rockers, NOS two groove h.balancer, unkwn cam-for now soon:pwr asst steering
was FE/FT, mount:390, C6R heads, C4ae int, w/ 361/391 FT Bellhous.,timing cover, & w. pump.
-Back on the road since jan '17
19mpg hwy, .040/298ci, arnd 8.7:1, ECG heads, stainless valves, ceramic coated ramshorn manifolds, B code int., eddy 4bbl, Durasprk II/C5ZF dizzy, C2AE rods,high ratio rockers, NOS two groove h.balancer, unkwn cam-for now soon:pwr asst steering
was FE/FT, mount:390, C6R heads, C4ae int, w/ 361/391 FT Bellhous.,timing cover, & w. pump.
-Back on the road since jan '17
- unibody madness
- Posts: 2140
- Joined: December 4, 2008, 4:33 pm
- Location: Paradise,CALIFORNIA 95969
Re: Air Conditioning
I have one I ordered for my 61, the problem I have is it deletes air intakes and deletes glove box springs and most of the glove box. I am rethinking their idea of installation
Turk build thread at:
viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
viewtopic.php?f=32&t=18944
It does not matter what you think, it only matters what you do about it!
- aj64f100390-292
- Posts: 228
- Joined: November 28, 2016, 11:57 pm
- Location: South West Missouri
Re: Air Conditioning
wow...the glove box was a bit small to begin with...I may find a bumpside air unit and others and make my own...idk..ive been thinking about making a bracket to hold the deluxe heater controls and 2 or so extra switches for the a/c and related parts...would look alot more stock than what most kits do...and I'm not a purist by any means...but mismatched knobs...bug me just my 2 centsunibody madness wrote:I have one I ordered for my 61, the problem I have is it deletes air intakes and deletes glove box springs and most of the glove box. I am rethinking their idea of installation
1964 f100 lwb 292 ECG Heads,4v, 4spd, '76 9" 3.25, orig. :292 3spdO/D, 3.92 spicer locker
19mpg hwy, .040/298ci, arnd 8.7:1, ECG heads, stainless valves, ceramic coated ramshorn manifolds, B code int., eddy 4bbl, Durasprk II/C5ZF dizzy, C2AE rods,high ratio rockers, NOS two groove h.balancer, unkwn cam-for now soon:pwr asst steering
was FE/FT, mount:390, C6R heads, C4ae int, w/ 361/391 FT Bellhous.,timing cover, & w. pump.
-Back on the road since jan '17
19mpg hwy, .040/298ci, arnd 8.7:1, ECG heads, stainless valves, ceramic coated ramshorn manifolds, B code int., eddy 4bbl, Durasprk II/C5ZF dizzy, C2AE rods,high ratio rockers, NOS two groove h.balancer, unkwn cam-for now soon:pwr asst steering
was FE/FT, mount:390, C6R heads, C4ae int, w/ 361/391 FT Bellhous.,timing cover, & w. pump.
-Back on the road since jan '17
-
- Posts: 932
- Joined: January 10, 2011, 4:58 pm
- Location: High Springs Florida
Re: Air Conditioning
https://www.classicautoair.com/shop/196 ... ng-system/
i used one of these . left a little glove box but door spring works, just have to deal with knobs , but in 64 im sure any truck owner would not have minded miss matched knobs to have A/C
Danny
i used one of these . left a little glove box but door spring works, just have to deal with knobs , but in 64 im sure any truck owner would not have minded miss matched knobs to have A/C
Danny
-
- Posts: 33
- Joined: February 9, 2008, 11:22 pm
- Location: kansas
Re: Air Conditioning
Hunters 64 I used this unit as well but don't think it cools as well as it should. Does yours cool good? Thanks
-
- Posts: 932
- Joined: January 10, 2011, 4:58 pm
- Location: High Springs Florida
Re: Air Conditioning
yes for Florida weather it did good
Danny
Danny
Re: Air Conditioning
I have it installed. It is a great system. Easy install with very good instructions. Very little modification to the vehicle that can't be undone. You do cover up the fresh air vents and lose a lot of the glove box.
I ordered some replacement knobs from dennis carpenter and used them for the system. That way they match the stock knobs!
I ordered some replacement knobs from dennis carpenter and used them for the system. That way they match the stock knobs!
Re: Air Conditioning
Post some pictures of your AC setup with the factory type truck knobs from Carpenter.
I'm sure everyone would like to see the finished product.
Bradshaw
I'm sure everyone would like to see the finished product.
Bradshaw
Always know where you will be, when you get where you're going - Jerry Clower
Re: Air Conditioning
that looks good and stock.
- aj64f100390-292
- Posts: 228
- Joined: November 28, 2016, 11:57 pm
- Location: South West Missouri
Re: Air Conditioning
that looks great! thats what I'm looking for...short of the glove box issue it sounds like its real nice
Last edited by aj64f100390-292 on July 1, 2018, 2:04 pm, edited 1 time in total.
1964 f100 lwb 292 ECG Heads,4v, 4spd, '76 9" 3.25, orig. :292 3spdO/D, 3.92 spicer locker
19mpg hwy, .040/298ci, arnd 8.7:1, ECG heads, stainless valves, ceramic coated ramshorn manifolds, B code int., eddy 4bbl, Durasprk II/C5ZF dizzy, C2AE rods,high ratio rockers, NOS two groove h.balancer, unkwn cam-for now soon:pwr asst steering
was FE/FT, mount:390, C6R heads, C4ae int, w/ 361/391 FT Bellhous.,timing cover, & w. pump.
-Back on the road since jan '17
19mpg hwy, .040/298ci, arnd 8.7:1, ECG heads, stainless valves, ceramic coated ramshorn manifolds, B code int., eddy 4bbl, Durasprk II/C5ZF dizzy, C2AE rods,high ratio rockers, NOS two groove h.balancer, unkwn cam-for now soon:pwr asst steering
was FE/FT, mount:390, C6R heads, C4ae int, w/ 361/391 FT Bellhous.,timing cover, & w. pump.
-Back on the road since jan '17
-
- Posts: 579
- Joined: December 31, 2009, 5:26 pm
- Location: Saint George Utah
- slixtyfive
- Posts: 443
- Joined: January 19, 2007, 2:03 pm
- Location: Eastern Iowa
Re: Air Conditioning
I'm going rogue on you here but where did you get that center gauge pod? I kinda like that!!
"It's better to be gone but not forgotten, than to be forgotten but not gone." Gary Allan
Re: Air Conditioning
It is a dakota digital pod. It was easy to install. The one I have was for the Bronco originally, so I had to make a real minor cut of the dash at the bottom of the gauge, but I think they make a slightly different one for the slicks now.
- River City
- Posts: 51
- Joined: September 7, 2016, 1:59 am
- Location: Ankeny, IA
- Contact:
Re: Air Conditioning
I just installed this kit as well! So far so good. The glove box thing is a bit of a downer but I plan to put a little drawer or something under the seat to make up for it. With my kit I ordered their upgraded black anodized knobs, a nice bonus with those is that they are back lit, that'll come in handy at night.
'61 F100 unibody SWB (Vic swapped daily driver)
'62 F100 Unibody SWB
'66 Mustang 'vert
'31 Ford Model A
'62 F100 Unibody SWB
'66 Mustang 'vert
'31 Ford Model A
- River City
- Posts: 51
- Joined: September 7, 2016, 1:59 am
- Location: Ankeny, IA
- Contact:
Re: Air Conditioning
'61 F100 unibody SWB (Vic swapped daily driver)
'62 F100 Unibody SWB
'66 Mustang 'vert
'31 Ford Model A
'62 F100 Unibody SWB
'66 Mustang 'vert
'31 Ford Model A
- '66 Camper Special
- Posts: 26
- Joined: July 15, 2017, 5:11 am
- Location: Texas
Re: Air Conditioning
I didn't see any mention of it on Classic Auto Air page, are their kits available for an inline 6? I did some initial searches on other aftermarket a/c system websites, and everything was for a V8.
1966 F250 Custom Cab Camper Special
Re: Air Conditioning
Both DASH photos look great. Or maybe I should say they look COOL.... since you both have A/C. I'm still sweating it. Maybe I should upgrade too, especially with the 98 degree days with the 73% humidity.
I gotta go wipe the sweat out of my eyes......
I gotta go wipe the sweat out of my eyes......