Heads up to Atlanta area folks.

FL, GA, AL, SC, MS, TN, NC

Moderators: Kid, Casey 65

Post Reply
User avatar
charliemccraney
Posts: 1743
Joined: July 9, 2008, 10:02 pm
Location: Lawrenceville, GA

Heads up to Atlanta area folks.

Post by charliemccraney »

I put this in classifieds too but I think it might do better here.

There is a '59 F350 at the Atlanta North Pull A Part. I looked at it a few weeks ago but haven't been back since. It had a Y-Block at that time that could be a 312 based on the casting number. It's definitely not the original motor. The part numbers don't match the year model. I might go back tomorrow to see if I can determine what it is. I don't know if anything else will swap to our trucks. I don't really have room for the motor at this time so if someone can rescue it, it will be great!
Lawrenceville, Ga
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.
User avatar
charliemccraney
Posts: 1743
Joined: July 9, 2008, 10:02 pm
Location: Lawrenceville, GA

Post by charliemccraney »

Well, last weekend, I pulled the pan and found that it was a 312. I went to get it yesterday and the truck had been crushed during the week :(. I hope someone got it.
However, there is a Mercury with a Y-block, which is also possibly a 312. I didn't have time to pull the pan.
Lawrenceville, Ga
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.
Post Reply