Slick 60's

hey guys if you have a twin i beam truck and want to lower it and don't want to cut it up. text me or message me. i have built a kit thats 50/50 weld and bolt in or 100% bolt in if you have good drill bits.lol i currently have the 1st one in my 77 f100 drives good and no bumpsteer. uses your original crossmember i didnt even remove the engine. and you can put it back stock if you want to. i know its the wrong year for most of you guys but my reserch shows it should work fine. text my phone and ill send you some photos 423-737-9645. crown vic suspension is good but i didn't want to cut up my truck. and i wanted to use my wheels that were - offset my 62 unibody has mustang ll suspension and that truck is my connection with this site. got the 77 in a trade. uses mustang ll arms and spindles.

definitely interested.i already have a 77 twin I beam suspension up front to get power disc brakes.

if you can text me on the number on the post and ill send you some photos. thanks

I tried texting but got no response.

I'd be interested too.....

interested

Mike

I sent a text yesterday but haven't heard anything back.

I'm interested as I've got 75 front end to go in for the disc brakes. Sent PM.

Anyone heard from him?

I haven't.

So apparently, the trail has gone cold with no response from oldred. Anyone got contact info for him on FB or otherwise?

Oldred = 1 hit wonder. Wished he would post back here or respond to one of us.

Why not just post the pics in the thread?

The guy was a flake. He posted that here and then never responded to anyone's PMs or questions.