parts wanted and parts for sale

Next location of SlickStock

Moderators: Kid, Casey 65

Post Reply
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

parts wanted and parts for sale

Post by ezernut9mm »

i will be bringing a bed full of small and large parts to sell at ss and i am in need of some. if anyone that is attending has a good holley 390 carb or something close please bring it. i am also looking for some stock white knob inserts, a good drivers side visor (red padded a plus) and maybe a good pair of red arm rests. bring your stuff to sell or trade.
i have a 65 grille that was spoken for, but havent heard from him in a while and i also will have a big truck lower valance. it needs some work, but is pretty solid. fe exhaust manifolds, a 2v oilbath air filter housing, automatic trans pedal shaft with bushings, pair of aluminum headlight doors, etc. lots of misc. stuff. be there and ready to barter and bargain. i will be.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
MadMaxetc
Posts: 2600
Joined: July 10, 2006, 12:00 pm
Location: Wichita, KS
Contact:
United States of America

Re: parts wanted and parts for sale

Post by MadMaxetc »

I will have a 65 and 64 grill, 61-63 upper and lower valance, as well as a few other items.

Chris, I am interested in the big truck lower valance.

I am also fooking for the 61-64 4x4 PS bubble type fender...I don't want the battery in the engine bay.
Dan
Project: '63 F-100 LWB / 460 / C6 / 2x4
My Build Thread
DanH
Posts: 41
Joined: August 2, 2006, 8:34 am
Location: Little Rock, Arkansas
United States of America

Re: parts wanted and parts for sale

Post by DanH »

HERE'S SOME STUFF I'M BRINING TO SLICK STOCK. NO REASONABLE OFFER REFUSED.
1. Driver Door Shell- ready to paint $100
2. Upper Radiator Valance 25
3. Tail light lens (67 up) with backup 5
4. Tail light trim (not 66) ? 2 ea
5. Aftermarket oil pan FE powdercoated $50 like new
6. Koss am/fm cassette radio 15
7. Edelbrock valve covers 25
8. 80’s Turbine Hubcaps $50
9. Engine brackets ’71-76 FE $20 for all
10. Headlight buckets 10 both
11. Front Signal light housing 10 each
12. Front signal light trim 10 each
13. Hood bumpers (57-60) 1
14. Choke cable with knob 2
15. Chrome fender emblem 5
16. Chrome fender emblem (not 66) 2 each
17. Tailgate hinge 1
18. Styleside tailgate hinge (paintable) 10
19. Hood latch loop 2
20. Hood safety catch 2
21. Inside door handles 10 pair
22. Inside window crank handles 10 pair
23. Passenger window crank assembly w/handle 25
24. OS door handles – no buttons 20 pair
25. OS door handles with buttons 25 pair
26. Bottle jack hold down 2
27. Steering column firewall plate 10
28. “FORD” grill letters (3 sets) 10 set
29. Inside lower door panel trim ring 10
30. Dash pad ($799 new) 100
31. Inside arm rests (original) 30
32. Inside arm rests (not original) 20
NEEDED - small cover for passenger kick panel hole, just under dash; driver side rear stake pocket cover, center cowl hole cover (where my rubber plug is on my 66, I want an earlier metal cover)
DanH
Post Reply