body side trim
body side trim
the side trim on the box of my 64 is toast, and i need new ones. does anyone know if the repop trim designed for 65-66 trucks from lmc will work on a 64, are the sizes and details the same
Re: body side trim
The trim is different in cross-section and width, as well as overall length (hood).
Will it work, yes, but will require elimination of original hood emblems and additional mounting holes and hardware.
Paul
Will it work, yes, but will require elimination of original hood emblems and additional mounting holes and hardware.
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
Re: body side trim
my 64 trim looked horrible, all the chrome was peeling off the mouldings. took them off and removed the rest of the chrome and polished out the aluminum, the look almost new
64 Build viewtopic.php?f=32&t=31755
Re: body side trim
I believe the original moldings are anodized aluminum; either way, that would work (although chrome removal from aluminum could be fun) , but be prepared to polish often! Or find a workable clear coat.
Paul
Paul
The Ford Orphanage
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul
Life's too short for boring vehicles!
My quest to develop a universal solvent is held up by the lack of a storage container.
Paul