Flowmasters or ???
- qwertyd10n
- Posts: 496
- Joined: September 13, 2007, 9:47 am
- Location: Southern Alberta

Flowmasters or ???
Hello everyone,
I've been thinking for a while about putting a different set of mufflers on my truck to enhance that V8 sound a little... but I don't want it to be too crazy loud either. After throwing some ideas around during the Sunday chat I was pretty sure I wanted a set of one of Flowmaster's 40 series. However after doing a little more research, I'm wondering how loud and how much of the Flowmaster "drone" those mufflers will give me.
I'm really curious to hear how different mufflers sound on engines similar to my 352. I have a set of long tube headers and then true dual exhaust dumping right in front of the rear axle. If I do replace the mufflers, I'm also thinking of having a H pipe made up to equalize between the two cylinder banks.
Thoughts?
Cheers,
Dion
I've been thinking for a while about putting a different set of mufflers on my truck to enhance that V8 sound a little... but I don't want it to be too crazy loud either. After throwing some ideas around during the Sunday chat I was pretty sure I wanted a set of one of Flowmaster's 40 series. However after doing a little more research, I'm wondering how loud and how much of the Flowmaster "drone" those mufflers will give me.
I'm really curious to hear how different mufflers sound on engines similar to my 352. I have a set of long tube headers and then true dual exhaust dumping right in front of the rear axle. If I do replace the mufflers, I'm also thinking of having a H pipe made up to equalize between the two cylinder banks.
Thoughts?
Cheers,
Dion
-
Brian Taylor
- Posts: 1469
- Joined: August 18, 2009, 3:52 pm
- Location: Dallas , Texas
- Contact:

2 cents worth.
I put a set of Flowmaster 40s on my 66 Fury with a 383. It had cherry bombs on it when I got it. After putting the FM on they sounded just like the cherry bombs. I did not like the resonation the crude rumble just a bit too loud, and I like loud.
Loud pipes save lives.
I like turbo muffler with a crossover but I have not experimented with too many Fords yet.
I put a set of Flowmaster 40s on my 66 Fury with a 383. It had cherry bombs on it when I got it. After putting the FM on they sounded just like the cherry bombs. I did not like the resonation the crude rumble just a bit too loud, and I like loud.
Loud pipes save lives.
I like turbo muffler with a crossover but I have not experimented with too many Fords yet.
1966 Ford F-100 LWB 300
-
Anthony
magnaflows.... I like this sound..
http://www.youtube.com/watch?v=8gf9hy_JvtI
cherry bombs... too loud for me..
http://www.youtube.com/watch?v=S9XNC6n0LNQ
flowmasters... sounds good too....
http://www.youtube.com/watch?v=qLJ6cZ18nQM
Try these on for size...
http://www.youtube.com/watch?v=8gf9hy_JvtI
cherry bombs... too loud for me..
http://www.youtube.com/watch?v=S9XNC6n0LNQ
flowmasters... sounds good too....
http://www.youtube.com/watch?v=qLJ6cZ18nQM
Try these on for size...
- charliemccraney
- Posts: 1743
- Joined: July 9, 2008, 10:02 pm
- Location: Lawrenceville, GA
Hooker Aerochamber and X pipe dumping in front of the axle.
http://www.youtube.com/watch?v=-nBbTpkfHS4
Looks something like this:

http://www.youtube.com/watch?v=-nBbTpkfHS4
Looks something like this:

Lawrenceville, Ga
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.
-
ICEMAN6166
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842

- Uncle Skip
- Posts: 4695
- Joined: July 15, 2006, 8:30 pm
- Location: Pearland, Texas

Mufflers.
Here we go again.
IMHO (or maybe not 'so humble'), my personal choice is Flowmaster 40's with a cross over H-pipe.
Before you install any crossover, use some cheap silver spray paint on the exhaust pipes around the transmission area and drive the truck.
Put your H-pipe where the paint burns off.
U@ss
Here we go again.
IMHO (or maybe not 'so humble'), my personal choice is Flowmaster 40's with a cross over H-pipe.
Before you install any crossover, use some cheap silver spray paint on the exhaust pipes around the transmission area and drive the truck.
Put your H-pipe where the paint burns off.
U@ss
I'm not arguing with you. I'm just explaining why I'm right.
Pardon me. Does your deaug bite?
Pardon me. Does your deaug bite?
please check out flo pro mufflers they sound great and priced very wellhave them on my 428 sound great no dreaded DRONE.
flopro.com
flopro.com
2010 Ford Edge
99 Ford Expedition
65 Ford f-100 swb
460 stock other than a double roller timing chain and a s475 TURBO pushing 6psi of boost (now 12lbs)
351 W Pulled and on garage floor in storage
428 4v (R.I.P)
c-6 wide ratio modified
torino front stub
home made ladder bar rear with air bags
11.96 sec @ 110mph 1\4mile (best with the 428)
99 Ford Expedition
65 Ford f-100 swb
460 stock other than a double roller timing chain and a s475 TURBO pushing 6psi of boost (now 12lbs)
351 W Pulled and on garage floor in storage
428 4v (R.I.P)
c-6 wide ratio modified
torino front stub
home made ladder bar rear with air bags
11.96 sec @ 110mph 1\4mile (best with the 428)
- Uncle Skip
- Posts: 4695
- Joined: July 15, 2006, 8:30 pm
- Location: Pearland, Texas

- 65f100_Thug
- Posts: 612
- Joined: October 13, 2008, 9:09 pm
- Location: Arkansas

- ezernut9mm
- Posts: 9141
- Joined: July 21, 2006, 9:37 pm
- Location: KCMO

fe's are a "quiet" engine. so what sounds loud on a windsor or Y may not sound as loud on an FE.
i used dynomax super turbos and though they sounded good, they were not loud enough for me.
this time i am going to try some flowmaster knock offs to see if i like the sound.
if not, i am not out much and could probably sell them on craigslist to get some of my $$$ back.
and the "drone" is more about where the pipes exit.
i used dynomax super turbos and though they sounded good, they were not loud enough for me.
this time i am going to try some flowmaster knock offs to see if i like the sound.
if not, i am not out much and could probably sell them on craigslist to get some of my $$$ back.
and the "drone" is more about where the pipes exit.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
-
ras4434
Magnaflow all the way, ive had the flowmaster 40 series, 2000 rpm drone drove me nuts, they sound great when accelerating and such, but they do drone , i had them dumpped before the axle, out the side before the tires, out the side after the tires, and straight out the back, it never went away,, my magnaflows do not do that
________
Groove
________
Groove
Last edited by dwbr on February 7, 2011, 12:39 am, edited 1 time in total.
- qwertyd10n
- Posts: 496
- Joined: September 13, 2007, 9:47 am
- Location: Southern Alberta

For all the guys who recommended the Flowmaster 40s, can you be a little more specific as to which blend of 40s you have:
Cheers,
Dion
- 40 Series Delta Flow
- Super 40
- 40 Series Classic
- Original 40 Series
Cheers,
Dion
- charliemccraney
- Posts: 1743
- Joined: July 9, 2008, 10:02 pm
- Location: Lawrenceville, GA
Maybe the tailpipe length and exit is a Flowmaster thing??
With my Hookers, there is no drone. It has a very deep tone at idle. Cruising in overdrive, at about 2000rpm, the road noise and exhaust noise are in competition to be the loudest; conversation is possible. Acceleration sounds great! I like the way they sound much more than any chambered Flowmaster I've heard.
Something I have heard to cure drone is to install a different muffler on each pipe. For instance, install one that's 10" long on the left and one that's 13" long on the right. That way they don't resonate. I don't know if it really works. I have not yet had to try it.
With my Hookers, there is no drone. It has a very deep tone at idle. Cruising in overdrive, at about 2000rpm, the road noise and exhaust noise are in competition to be the loudest; conversation is possible. Acceleration sounds great! I like the way they sound much more than any chambered Flowmaster I've heard.
Something I have heard to cure drone is to install a different muffler on each pipe. For instance, install one that's 10" long on the left and one that's 13" long on the right. That way they don't resonate. I don't know if it really works. I have not yet had to try it.
Lawrenceville, Ga
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.
1961 F100 Unibody
318 Y-block (292 +.070 bore, +.170 stroke), FMS T5-Z w/Mustang 10.5" diaphragm clutch.
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

[albumimg]473[/albumimg][albumimg]470[/albumimg]
two of the sweetest sounding FE powered Slicks I have heard are Wyatt's on the left and Truckfarmer's on the right
To my knowledge they are both flowmaster 40 classics.
don't use glasspacks on a stock-cammed FE. They sound like they came straight off the Reserve.

two of the sweetest sounding FE powered Slicks I have heard are Wyatt's on the left and Truckfarmer's on the right
To my knowledge they are both flowmaster 40 classics.
don't use glasspacks on a stock-cammed FE. They sound like they came straight off the Reserve.

It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..
- stronger66ratfink
- Posts: 1131
- Joined: March 1, 2007, 4:02 pm
- Location: Friendswood, Texas
i SAY RIP 'UM ALL OFF AND LET THE TRUCK ROOOAR!
OK, I've got the FM40's also and with the 3/4 cam folks say
"dat dang truck sound bad as....Bro"
Then the white guy pulls up and says "cool"!
at the muffler shop, next up Okla Twice Pipes!

the muffler question is the easy side of it,
if ya really want to get folks stired up with each other ask
Tail pipes out the back, corners or sides!
OK, I've got the FM40's also and with the 3/4 cam folks say
"dat dang truck sound bad as....Bro"
Then the white guy pulls up and says "cool"!
at the muffler shop, next up Okla Twice Pipes!

the muffler question is the easy side of it,
if ya really want to get folks stired up with each other ask
Tail pipes out the back, corners or sides!
- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

- Johnny Canuck
- Posts: 8291
- Joined: April 9, 2006, 11:14 pm
- Location: Edmonton, Alberta.

sounds like Miss Daisy
http://www.hulu.com/watch/4118/saturday ... offee-talk
http://www.hulu.com/watch/4118/saturday ... offee-talk
It's a race.. Will hell freeze over or will JC finish his truck first. Stay tuned..

