Parts

don luster · Post by **don luster** » April 15, 2010, 10:03 am

I lost or misplaced the round metal tubes that go into the rubber motor mounts for a 223CI 63 6th cyl engine. Does anyone have some for sale?Thanks

64 f100 · Post by **64 f100** » April 15, 2010, 7:33 pm

don't know what I did with those, lbut I had the tubes. If someone has one to measure from I think those are just a piece of pipe or tubing basically.

Rich

Post by **Greg D** » April 15, 2010, 8:21 pm

I believe the 292 & 223 ones are the same length - I am sure I have at least one around here and can get you the measurements to make some. Like Rich - nothing special, just a piece of tubing.

fmartin_gila · Post by **fmartin_gila** » April 16, 2010, 7:53 am

I made mine out ot 4130 aircraft thin wall tubing. the length was 1-13/16 or 1-7/8, Don't remember exactly, but they do have to be the right length to get the proper squish or the mounts don't do like they should.

Fred