tag rivets

castruck_1964 · Post by **castruck_1964** » March 11, 2007, 8:03 pm

removed my door jam id tag some time ago. :hm:

was wondering what you guys use for replacements or do I just use regular POP rivets

FORDBOYpete · Post by **FORDBOYpete** » March 11, 2007, 9:36 pm

Marine Suppliers have "Shelby Style" Barrel Rivets that he used on both his early AC Cobras & his efforts at FoMoCo,.
Otherwise you can probably buy OEM rivets from Marti Motors in AZ, the guy that makes Data Plates by License from FoMoCo

FBp

jakdad · Post by **jakdad** » March 11, 2007, 9:41 pm

Also from a place called Tags Backeast.
Nice folks.

ezernut9mm · Post by **ezernut9mm** » March 11, 2007, 11:24 pm

got pdf? amk sells them for $2 for two. all the way at the bottom of the page in the middle.

http://amkproducts.com/Catalog_PDF/158-169.pdf

FORDBOYpete · Post by **FORDBOYpete** » March 11, 2007, 11:45 pm

At the bottom of Page 12 in the middle column.. . .

ICEMAN6166 · Post by **ICEMAN6166** » March 12, 2007, 12:41 pm

i saved the original ones and reused them. i have done it many times. $1 each is not the problem, if they would send them in the mail i would buy some but its not worth $5 or more each to get them.

jakdad · Post by **jakdad** » March 12, 2007, 5:58 pm

ezernut9mm wrote:got pdf? amk sells them for $2 for two. all the way at the bottom of the page in the middle.

http://amkproducts.com/Catalog_PDF/158-169.pdf

That's them. Best price I've seen.

Johnny Canuck · Post by **Johnny Canuck** » March 12, 2007, 6:14 pm

One of the Falcon places has them too , for the same price. But they have a minumum $25 order, too. Seriously considered getting white knobs for the slick to get some $2 rivets.

Anybody know what the minimum order is with these guys? Or is anyone willing to get a bunch of them and sell them to the club members?

JC

Comet · Post by **Comet** » March 12, 2007, 9:54 pm

JC, I could use some of their junk. Rivets and those carb linkage doo hickies.