Looking for some guidance or point to a good thread. Need to reinstall the stock bezel on my radio, and can't figure out how to line up the small brass gear to the bezel gear. Took it out to replace the speaker, check the capacitors and clean it up. Also put in a new antenna.
Stock Radio Install
Stock Radio Install
Last edited by GJ1963 on March 12, 2013, 11:34 pm, edited 1 time in total.
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
Re: Stock Radio Install
that piece pulls out of the radio and is installed in the faceplate then pushed back into the radio when installing the face.
the washers shim the brass gear so it lines up with the nylon gear and the clips are one inside (behind or below )the gear and one outside the face
i have the full instruction somewhere ill try to find it and post the text.
the washers shim the brass gear so it lines up with the nylon gear and the clips are one inside (behind or below )the gear and one outside the face
i have the full instruction somewhere ill try to find it and post the text.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Re: Stock Radio Install
Be vwey carefull, those nylon gears break easily.
Rich
Rich
1961 F350
1964 Galaxie convertable
1964 flairside, style side, and longbed
1965 Ranger, and shortbed
1966 long bed, and shortbed
A few parts trucks also
1991 Capri
2011 F250
2004 Lexus
1964 Galaxie convertable
1964 flairside, style side, and longbed
1965 Ranger, and shortbed
1966 long bed, and shortbed
A few parts trucks also
1991 Capri
2011 F250
2004 Lexus
Re: Stock Radio Install
Thank you!!! That's what I needed to figure it out. It's not luck but completely unexplainable as to why the nylon gear did not shatter when I took it apart. I am now rocking out to AM radios finest. Until I get frustrated and take it back apart to add a aux in line.
Christine moment - when I got the truck and first connected the battery it started playing out clearly 'little bitty pretty one'. Through this speaker - having sat open for years with a smashed windshield.
Christine moment - when I got the truck and first connected the battery it started playing out clearly 'little bitty pretty one'. Through this speaker - having sat open for years with a smashed windshield.
- ezernut9mm
- Posts: 9141
- Joined: July 21, 2006, 9:37 pm
- Location: KCMO
Re: Stock Radio Install
wow.
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles
i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.