Greetings
-
- Posts: 13
- Joined: April 23, 2014, 7:42 pm
Greetings
Greetings!
Ended up buying a 66 f100 short box, 3.03 top loader, with some sort of FE motor. Never had anything this old before, but having fun so far! Looks like the motor was rebuilt at some point, but having trouble getting a sense of when or what I have. What I know is it has a edelbrock intake, performer carb, and some unknown valve covers and air cleaner. Trying to figure out what I have motor wise, and when it might have been done (hoping there might be some clues in the pictures). Thoughts? Seems to run reasonably well.
Short term plans are to complete the tuneup (already had pertronix ignition, but replaced the wires, cap, rotor last weekend), plugs are going in this weekend. Taking it to a performance shop to have a 3 point belt installed soon (not something I have done before and want to make any mistakes with). Considering power brakes / dual chamber master too, and then some rust touch up (mostly just the seams need attention). Will probably POR 15 them.
I'm in central Iowa, so hoping to stop by the upcoming meet.
https://www.dropbox.com/sh/jn5jwzgjqsnd ... Lh4Rdjtmja
Ended up buying a 66 f100 short box, 3.03 top loader, with some sort of FE motor. Never had anything this old before, but having fun so far! Looks like the motor was rebuilt at some point, but having trouble getting a sense of when or what I have. What I know is it has a edelbrock intake, performer carb, and some unknown valve covers and air cleaner. Trying to figure out what I have motor wise, and when it might have been done (hoping there might be some clues in the pictures). Thoughts? Seems to run reasonably well.
Short term plans are to complete the tuneup (already had pertronix ignition, but replaced the wires, cap, rotor last weekend), plugs are going in this weekend. Taking it to a performance shop to have a 3 point belt installed soon (not something I have done before and want to make any mistakes with). Considering power brakes / dual chamber master too, and then some rust touch up (mostly just the seams need attention). Will probably POR 15 them.
I'm in central Iowa, so hoping to stop by the upcoming meet.
https://www.dropbox.com/sh/jn5jwzgjqsnd ... Lh4Rdjtmja
Re: Greetings
f r o m
K A N S A S
Will see you at SlickStock
K A N S A S
Will see you at SlickStock
.
.
.
[b]'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
.
.
[b]'' I think what scares me the most about you guys is that I understand you '' ..... KID
'' lookin good, a little paint adds at least 100hp!'' ....... COOTER
'' well an old guy can dream cant he? ''............ICEMAN
''I would donate organs before selling my slick''........ HOOFBEAT RACER
- Alan Mclennan
- Posts: 9324
- Joined: October 14, 2006, 6:16 pm
- Location: In the shed... Cranebrook NSW
Re: Greetings
from down here, I`ll be there in August, see you there!
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
Re: Greetings
Welcome from SE Iowa. You live in the heart of slick land!
Your valve covers look like Cal Custom. Since you hate them, go ahead and give 'em to me!
Air cleaner looks like a Cady/Olds or repro. Here's the current repro Speedway sells.
http://www.speedwaymotors.com/Technosta ... ,1052.html
Could also be boat related since it's not exactly like the repros.
Only way to really know what an FE is is to measure stroke to see what crank you have. Can't measure bore without pulling a head or the pan.
You got a nice looking truck, I'm jealous.
SPark
Your valve covers look like Cal Custom. Since you hate them, go ahead and give 'em to me!
Air cleaner looks like a Cady/Olds or repro. Here's the current repro Speedway sells.
http://www.speedwaymotors.com/Technosta ... ,1052.html
Could also be boat related since it's not exactly like the repros.
Only way to really know what an FE is is to measure stroke to see what crank you have. Can't measure bore without pulling a head or the pan.
You got a nice looking truck, I'm jealous.
SPark
1932 Ford 5 window coupe. 302/C4
1962 8V-390/C6 Unibody Short Bed Soon to be Big Window - The Lincoln that never was
2013 F150 Super Crew Eco Boost 4x4
2015 Ford Edge for the little lady, because she said so!
2007 Mustang GT, 4.6-3V/5 Speed. Only 8680 miles on the clock.
More toys, I need more toys!!!
1962 8V-390/C6 Unibody Short Bed Soon to be Big Window - The Lincoln that never was
2013 F150 Super Crew Eco Boost 4x4
2015 Ford Edge for the little lady, because she said so!
2007 Mustang GT, 4.6-3V/5 Speed. Only 8680 miles on the clock.
More toys, I need more toys!!!
- slixtyfive
- Posts: 443
- Joined: January 19, 2007, 2:03 pm
- Location: Eastern Iowa
Re: Greetings
Welcome aboard!
I saw that truck listed on CL and based on the pics, thought it looked pretty decent. Have fun with it and maybe i'll see you in August!
I saw that truck listed on CL and based on the pics, thought it looked pretty decent. Have fun with it and maybe i'll see you in August!
"It's better to be gone but not forgotten, than to be forgotten but not gone." Gary Allan
Re: Greetings
I haven't seen any that color green running around..
In fact that is maybe the first one in the club that shade of green. We will be seeing you at Slickstock !
In fact that is maybe the first one in the club that shade of green. We will be seeing you at Slickstock !
Re: Greetings
Welcome! Nice truck too!
Simon
65 f 100
56 willys m38a1 SOLD ( Have had since high school )
65 f 100
56 willys m38a1 SOLD ( Have had since high school )
- Alan Mclennan
- Posts: 9324
- Joined: October 14, 2006, 6:16 pm
- Location: In the shed... Cranebrook NSW
Re: Greetings
foodstick wrote:I haven't seen any that color green running around..
In fact that is maybe the first one in the club that shade of green. !
Honey, If I say I`ll fix something I will, there`s no need to remind me every 6 months!!
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
66 f100 tabletop swb 351 Clevo C6 "Beryl"
Slick Stock 3 KCMO
Slick Stock 4 Altoona
Slick Stock 5 KCMO
Slick Stock 6 Altoona
Slick Stock 7 Salina KS
Slick Stock 8..............................
Re: Greetings
Aloha From Kansas! Great Looking Truck.........
- therealjoeshmoe
- Posts: 1059
- Joined: July 24, 2006, 2:18 am
- Contact:
-
- Posts: 932
- Joined: January 10, 2011, 4:58 pm
- Location: High Springs Florida
Re: Greetings
WELCOME FROM THE SUNSHINE STATE !
Danny
Danny
Re: Greetings
Welcome from N.W.Ohio. I like your air cleaner it's what I'm planning to put on my 66, Yours looks like it's made of aluminum.
Re: Greetings
Welcome to the Slickest place on the web!!! I'll have my big ole' girl at Slickstock from Huntington WV, so stop on by and have a blast!!
-
- Posts: 13
- Joined: April 23, 2014, 7:42 pm
Re: Greetings
Thanks everyone for the kind words! Have been through the basic items, did plugs, rotor, cap, wires and a oil change. The cap and wires were pretty bad! Di-electric grease was obviously not used at all. https://scontent-b-ord.xx.fbcdn.net/hph ... 4399_n.jpg
Seems to be running pretty well now! Dropped it off at karls performance to have the 3 point shoulder belt mounts put in. Can't wait to get it back.
Seems to be running pretty well now! Dropped it off at karls performance to have the 3 point shoulder belt mounts put in. Can't wait to get it back.
- Cletus Earl
- Posts: 15
- Joined: May 4, 2010, 10:16 am
- Location: Dog Trot Missouri,
Re: Greetings
from Phoenix.
Kevin
Kevin
kstones63
_______________________________________
63 F100
29 Ford Sedan Delivery
99 F250 PSD, 4x4, CC
95 F350 Flatbed Dually Diesel
_______________________________________
63 F100
29 Ford Sedan Delivery
99 F250 PSD, 4x4, CC
95 F350 Flatbed Dually Diesel
- FORDMANLCRACKEL
- Posts: 1237
- Joined: July 11, 2006, 9:48 pm
- Location: williamston, n.c.
- Contact:
Re: Greetings
From Eastern NC.
Lonnie
Lonnie
The most rewarding job i ever had was being a dad.
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/
1988 Ranger Build http://s275.photobucket.com/albums/jj31 ... %20RANGER/