cabs. will it fit ?
- 1965fordf100
- Posts: 483
- Joined: February 25, 2008, 3:32 pm
- Location: Reno, NV
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
a lot of work
besides the cab mount issues theres also steering column mods, firewall mods and wiring differences.
i would not do it again due to the time needed to do all the modifications
besides the cab mount issues theres also steering column mods, firewall mods and wiring differences.
i would not do it again due to the time needed to do all the modifications
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
- slickmainer
- Posts: 2555
- Joined: October 8, 2007, 6:41 pm
- Location: Auburn Maine
- Contact:
- slickmainer
- Posts: 2555
- Joined: October 8, 2007, 6:41 pm
- Location: Auburn Maine
- Contact:
Re: cabs. will it fit ?
Still working on installing the 62-4 cab correctly on the blasted and painted 66 frame we got with the project truck.. We are using the front mounts from the 62-4 that are installed on the 66 frame, the 66 mounts are gone now. Biggest problem is making the power steering and steering column mate, and come out in the cab at a decent position. Looks like we will be needing spacers with the new rubber cab to frame bushings we bought in a kit to fit a 64....Any links to a completed backdate cab swap like this would be appreciated.
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
Re: cabs. will it fit ?
i went back and fixed the pics in my earlier post, after the update a while back they were not able to be seen.
if you notice how i used the early frame bracket and the rubber mount (which i later replaced with a donut made of thick wall tubing as there was too much rubber with the 4x4 rubber cab mount on top of the 2wd cab mount.)
if you notice how i used the early frame bracket and the rubber mount (which i later replaced with a donut made of thick wall tubing as there was too much rubber with the 4x4 rubber cab mount on top of the 2wd cab mount.)
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Re: cabs. will it fit ?
Is this the same with crewcabs