http://www.maplemotors.com/inventory/1409/info.php
truck sitting on 77/79 4x4 frame, plastic tie holding power steering cap down, needs floor pans, center cab braces, cab corners, bed etc... they cut the front of the bed down to fit the frame, welded braces to hold the bed up off the frame, no front bed support at all, all other supports welded,, so much more can list but not enough paper has major title issues as have a reconstructed vin #, the bondo is clearly visable and real bad I was sent 15 more pics of the bottom side, the sellers says you don't see the bottom so they are not worried about it and this jewel is priced @ 18,900 too many cold ones
Here is another 1965 f-100 to stay away from
- 6166 Junkyard Dog
- Posts: 3502
- Joined: July 23, 2006, 9:34 am
- Location: Reidsville, N.C.
- Contact:
Here is another 1965 f-100 to stay away from
Tom,
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,, Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,, Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
Re: Here is another 1965 f-100 to stay away from
Looks like they have ''1'' too many digits in that price, Tom!
Even at $8,900 it sounds like thay are still too proud of it.
Makes me laugh to think that they think a buyer won't be looking under it.
Even if it is just a roller I will still look under one, always. Looked at
a 65 Flatbed a guy had for sale for $3,000 that was a driver I saw at
a swap meet. Looked under it and saw a lot of stuff I didn't want to see.
Ewwwww!
TR
Even at $8,900 it sounds like thay are still too proud of it.
Makes me laugh to think that they think a buyer won't be looking under it.
Even if it is just a roller I will still look under one, always. Looked at
a 65 Flatbed a guy had for sale for $3,000 that was a driver I saw at
a swap meet. Looked under it and saw a lot of stuff I didn't want to see.
Ewwwww!
TR
- skidoorulz
- Posts: 359
- Joined: April 11, 2013, 9:02 pm
- Location: Billings MT
Re: Here is another 1965 f-100 to stay away from
Looks cool in the pictures. To bad they did not do it right. I also would have stretched the frame to fit the box rather than cut the box down. But that is me.
- 6166 Junkyard Dog
- Posts: 3502
- Joined: July 23, 2006, 9:34 am
- Location: Reidsville, N.C.
- Contact:
Re: Here is another 1965 f-100 to stay away from
I had a phone call yesterday when the person that was interested in this truck and wanted to know prices of repair panels that's when I found out the asking price of this truck, then sent me additional 15 pics,, just I hope he passed on this, did noticed they look like they sell more GM Products
Tom,
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,, Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
@
Lazy FORD Ranch
Where Ford Trucks Rest in Peace
Dakota,,, RIP will never be the same looking for 61-66 trucks again ,, Kathy
Slickstock,,, York, PA
Slickstock,,, Kansas City, MO
Slickstock,,, Altoona, IOWA
Slickstock,,, Salina, KS
Now Cooper will try his best
Cooper now has 2018 Slick Stock,, give him a fair star
Slickstock Kansas City, Mo
-
- Posts: 838
- Joined: August 2, 2014, 10:38 pm
- Location: Mustang, OK
Re: Here is another 1965 f-100 to stay away from
What, you don't like zippies as attachment tools?skidoorulz wrote:Looks cool in the pictures. To bad they did not do it right. I also would have stretched the frame to fit the box rather than cut the box down. But that is me.