Found a set of 8 bolt,centre dump exhaust manifolds still on the engine.Will these bolt on a 352 head.
Thanks,
Dan
391 Exhaust??
391 Exhaust??
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
Re: 391 Exhaust??
no
look at the pics and see why, the extra bolts and extra holes
330\361\391 FT
FE, 352,360,390 etc.
now if you found a set of these cast iron header that would be worthwhile
these are also useable
look at the pics and see why, the extra bolts and extra holes
330\361\391 FT
FE, 352,360,390 etc.
now if you found a set of these cast iron header that would be worthwhile
these are also useable
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Re: 391 Exhaust??
Brian,
Thanks for the quick response,I was actually at the junkyard debating to pull or not pull'em.Ended up getting a set of rust free 64style inter- fenders instead.
Thanks again.. See you in Salina
Dan
Thanks for the quick response,I was actually at the junkyard debating to pull or not pull'em.Ended up getting a set of rust free 64style inter- fenders instead.
Thanks again.. See you in Salina
Dan
___________________________________
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
"DW JONES TRUCKING"
WHISKEY HAULED,LIES TOLD AND WIDOWS WOO'ED......
"By appointment only"
-
- Posts: 612
- Joined: July 28, 2006, 8:31 pm
- Location: Monroe NJ
Re: 391 Exhaust??
Dan, they will bolt up but they have an extra hole in the middle for a heat source to carb. I think I read somewhere that there is a clearance issue on something, maybe the steering box. Tom
1966 F250 Camper Special parts truck
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
1966 F 100 w/391 ft
1965 F 100 project
1958 Edsel Pacer Convertible
1953 ford Customline 2 door
1952 8N
1967 triumph Bonneville
I'm still not a good welder but I've become a good grinder
Re: 391 Exhaust??
Tom,
I mocked them up on passenger side but not the driver. Thanks for the tip. I have a 2wd 65 F250. Moving the perch to the I6 location and extinding the engine mounts forward on a plate they will clear the pipe. As far as the extra hole that wont seal I am putting a 3/16 plate between head and manifold. I will mock it up on the driver side before going any further. I am keeping manual steering so maybe the manifold won't hit box.
I mocked them up on passenger side but not the driver. Thanks for the tip. I have a 2wd 65 F250. Moving the perch to the I6 location and extinding the engine mounts forward on a plate they will clear the pipe. As far as the extra hole that wont seal I am putting a 3/16 plate between head and manifold. I will mock it up on the driver side before going any further. I am keeping manual steering so maybe the manifold won't hit box.
Chris
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
Re: 391 Exhaust??
Chris
yesterday when i was looking for those pics i ran across this
pretty old but might be of some help
seems you may already have figured around a few of the issues
http://www.ford-trucks.com/forums/11730 ... heads.html
yesterday when i was looking for those pics i ran across this
pretty old but might be of some help
seems you may already have figured around a few of the issues
http://www.ford-trucks.com/forums/11730 ... heads.html
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Re: 391 Exhaust??
It is close on the passenger side crossmember, about 1/4" over it. Being a 2" pipe I think the exhaust man can clear the member with the 5" he had to play with. If not I'll make a 45° adapter between pipe and manifold out of some thick 2 1/4" pipe. I had thought of welding up the hole but if it cracks or won't work I'll have a chunk like Rusty Old F250 in the article.
Chris