hope it lasts as i used the por products and after 15 years i am unhappy as it seemed to help the rust and actually created it where ther was none before.bruceandersson wrote:I have used the rust seal products for a while now. They are supposed to be an upgrade tot he Por products in that they contain a UV block and do not require an overcoat. I've been happy with the results. Two things wear gloves, it will not come off if it dries on your skin. Buy more smaller cans. I know this is more expensive, but once open it does not store well.
i peeled about 95% of it off the firewall and underside of my cab over the winter, heat from a heat gun,some brake fluid and a scraper with sharp blades did a good job
i have been working a bit at a time on getting it off the frame , not easy with a cab and bed on but eventually i will get it all off.
cost a lot of $ for that por 15 years ago, now im using rustoleum which held up very well over time in the places i used it before and its way less expensive