Need a front right side drum brake cooling coil

The place to talk Slicks. All we ask is that discussion has something to do with slicks...

Moderators: Kid, Casey 65

blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

still dont understand where this thing is supposed to go.... Still believe my truck doesn't have any....
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
User avatar
Jarrod
Posts: 361
Joined: July 17, 2006, 3:11 pm
Location: California

Post by Jarrod »

I think they are produced by snipes. Back when these trucks were new, they were made by snipes in the good ol U.S. of A but now due to out sourcing, they are made by chinese snipes an imported here. You need to be carefull about those chinese snipes. They are sneeky
Cheers,
Jarrod
Z-MAN
Posts: 213
Joined: May 21, 2007, 9:28 pm
Location: Houston

Post by Z-MAN »

They are made in taiwan now and they are located right behind the thinga ma jig.
:lol:

Z
User avatar
jakdad
Posts: 1968
Joined: July 18, 2006, 4:07 pm
Location: Katy,Texas

Post by jakdad »

ICEMAN6166 wrote:you can find anything on the web.
http://images.google.com/images?hl=en&q ... ages&gbv=2

Glad that's cleared up. I don't have any hot titanium...................
Jim
norville
Posts: 194
Joined: October 1, 2006, 5:34 am
Location: North East Pa

Post by norville »

Don't forget to change our your muffler bearings while you're under the truck.

Oh, and check the Halogen level in you lights. :)

bob
User avatar
jwh f-100
Posts: 1903
Joined: June 11, 2007, 6:25 pm
Location: Equinunk, PA
United States of America

Post by jwh f-100 »

I installed slotted, stainless steel, low heat brake drums and removed the cooling coils. I thought it would be nice to install one of those cooling coils onto the master cylinder but my hydralic accelerator linkage gets in the way.
User avatar
ivaf100
Posts: 22
Joined: July 23, 2006, 1:08 pm
Location: Iva, S.C.

Post by ivaf100 »

I have all 4 used from an old parts truck that I will let go for $500 + shipping. I normally wouldn't recomend used brake parts, but these have been inspected and cleaned inside and out with rotor wash I had left over from my Army days.
On a quiet night you can hear a Chevy rust.
Frank
User avatar
Greg D
Posts: 10113
Joined: September 13, 2006, 4:39 pm
Location: Podunk Iowa
United States of America

Post by Greg D »

I solved my brake heating issues with out the coils. I just pack them with ice before I leave work.
1964 F 100 - I am going to do "something" with it.......

viewtopic.php?f=32&t=15942

1987 Mustang LX Convertible, 2.3 Auto - cruiser.
1994 F 150 XLT 2WD


~ Yes - I adopted another cat..............

Cam L Milan,
You'll be missed my friend.
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

((((WHERE)))) does this thing live??? I've never seen anything of that sort on my truck...
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
Yellardawg
Posts: 84
Joined: August 17, 2007, 4:37 pm
Location: NW Florida (Redneck Riviera)

Post by Yellardawg »

blackagatha wrote:((((WHERE)))) does this thing live??? I've never seen anything of that sort on my truck...



Everyone assumes you are joking....are you not?
blackagatha
Posts: 2582
Joined: March 10, 2007, 12:49 am
Location: Arizona

Post by blackagatha »

Alas, I was not joking.

It seems that this thing has nothing to do with our trucks. haha No, I am not a total dumbass, I just thought my truck may have been missing something.

uh yeah, there is no Headlight fluid or muffler bearings..... I KNOW that anyway.... hahaha
'63 with 390 & lots of juice. But never enough. Always want more.
ImageImageImage
User avatar
ezernut9mm
Posts: 9141
Joined: July 21, 2006, 9:37 pm
Location: KCMO
Sweden

Post by ezernut9mm »

this is the result after disabling the cooling coils on a semi. sea cans are famous for just this sort of thing. lol

Image
always
"i believe i've achieved satisfaction".-bubbles
"should i be gettin" baked for this boys?"-bubbles


i could no longer keep "r.i.p.ing" all of our fallen brothers and sisters, so i say here, slick loads of love and much respect to all you beautiful people.
Post Reply