Im doing a frame off resto on my 1966 F-100 and now is the perfect time to refill the rear axle with some new oil, but the owners manual does not specify the weight
First off, I did check some past posts and I belive I have an open rear, There is no "L" on the tag and I can spin one rear wheel while the other stays still.
So I'm hopping that enough evidence that I dont have a limited slip. I down wasn to screw up with the additive, if I dont need it
Any advice would be appreciated
whiat weight oil do I use for open 9 inch rear?
Welcome to the site, Cosmo.
My "Slickitis" affliction began here...
66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
66 F100 CC/65 F100 CC/66 F250 CC
If it starts to rain, they'll tax the splash.
If you want to fish, they'll tax the bass.
If you plant a yard, they'll tax the grass.
If you don't play nice, they'll fine your *$#!
where's the vent
the 9" rear on my mustang has a vent tube, but there is none on the truck, or at least I cant seem to find one....any ideas?
whiat weight oil do I use for open 9 inch rear?
Any one
I have a dana 44 3.92 gear ratio limited slip from a 61 uni if any one is interested. Needs rebuilt end to end though
Mike Kincheloe
I have a dana 44 3.92 gear ratio limited slip from a 61 uni if any one is interested. Needs rebuilt end to end though
Mike Kincheloe