One swedish F100 -65

FORDMANLCRACKEL · Post by **FORDMANLCRACKEL** » March 19, 2008, 10:01 pm

good looking truck

Lonnie

NeZ_F100 · Post by **NeZ_F100** » March 20, 2008, 3:53 am

6Slick5 wrote:Nice looking truck!

That is an interesting rear bumper, is it strong enough to provide any protection? Or primarily just for looks?

Welcome to the site!

Marty

The rear bumper is acctually rails that where mounted on the top of eatch rear fender.

NeZ_F100 · Post by **NeZ_F100** » March 20, 2008, 3:57 am

Jarrod wrote:Welcome from California. I have lots of extended family in Sweeden and Finland. I have never met them but my dad has. Nice truck. Why are Clevland motors more popular in Europe than in the U.S.?

My Cleveland was shipt from U.S and so was the C4, so now its one less in U.S

I live in the northen part of sweden, Luleå is that town called

NeZ_F100 · Post by **NeZ_F100** » March 20, 2008, 4:06 am

frank66 wrote:
NeZ_F100 wrote:the floor mats where placed there by previous owner, so they are long gone now (old pic)

Then Welcome! I don't believe I've ever seen a truck that had the parking light bezels painted body color. I like it.

i´m looking for chromed,stainless or aluminum grill, bezels, bumpers.
i want the truck to look something like this when i´m done

(but the 65 grill and so)

Gary Seymour · Post by **Gary Seymour** » March 20, 2008, 6:11 am

Hi, and welcome to the site.

I have a '62 and will be putting in a 351C. I noticed your headers and wonder if you know what they are from?

Due to location of steering box, etc., that last tube on drivers' side can't go back too far before heading downward. I guess that's why the exhaust is routed to pass. side on the 292 that's in there now. If I switch steering colums to loose the 3spd linkage it might create some room.

Anyone out there know of a header for 351C in a '62? Will be using a C4.

Thanks!

NeZ_F100 · Post by **NeZ_F100** » March 21, 2008, 3:14 am

Gary Seymour wrote:Hi, and welcome to the site.

I have a '62 and will be putting in a 351C. I noticed your headers and wonder if you know what they are from?

Due to location of steering box, etc., that last tube on drivers' side can't go back too far before heading downward. I guess that's why the exhaust is routed to pass. side on the 292 that's in there now. If I switch steering colums to loose the 3spd linkage it might create some room.

Anyone out there know of a header for 351C in a '62? Will be using a C4.

Thanks!

sorry, dont remeber from with car they were

only that there dynomax

Shiny · Post by **Shiny** » March 21, 2008, 12:39 pm

This thing is killer!
Who has details on it?

-Shiny

Johnny Canuck · Post by **Johnny Canuck** » March 21, 2008, 12:54 pm

would have looked at least 5 times better without the greasy pinstriping IMO
plus that colour looks like at least 6000 baby diapers I changed when my twins were little
But hey what do I know

Shiny · Post by **Shiny** » March 21, 2008, 1:12 pm

Johnny Canuck wrote:would have looked at least 5 times better without the greasy pinstriping IMO
plus that colour looks like at least 6000 baby diapers I changed when my twins were little
But hey what do I know

Less comments and more wrenchin needed from you JC

-Shiny

Johnny Canuck · Post by **Johnny Canuck** » March 22, 2008, 1:39 am

which I did. Wife came in the same time as you posted this and literally chased me out to the garage. Thanks for the reminder.

Hoofbeat Racer · Post by **Hoofbeat Racer** » March 22, 2008, 8:25 am

ouch, you got busted JC

Johnny Canuck · Post by **Johnny Canuck** » March 22, 2008, 9:38 am

ICEMAN6166 · Post by **ICEMAN6166** » March 22, 2008, 10:38 am

Johnny Canuck wrote:which I did. Wife came in the same time as you posted this and literally chased me out to the garage. Thanks for the reminder.

Mrs. Canuck ?

Jarrod · Post by **Jarrod** » March 22, 2008, 10:41 am

Less comments and more wrenchin needed from you JC

FORDMANLCRACKEL · Post by **FORDMANLCRACKEL** » March 23, 2008, 3:52 pm

Johnny Canuck wrote: But hey what do I know

Sounds like ya know how to change diapers

I think i've changed about that many too.

Lonnie

blackagatha · Post by **blackagatha** » March 25, 2008, 5:40 pm

NeZ_F100 wrote: So far it got:

T-bird -69 9" rearaxle
Ford Explorer -00 rear discbrakes and calipers
Ford Mustang front calipers and Volvo Amazon discs.

SO, I see you have the exploder brakes on a 9".... did they bolt right on, or did you have to do a lot of altering? OH, I forgot, the reason these guys told me no was because my 5x5.5 axles...

Also, these Volvo Amazon disks on the front, what spindles are they on? stock 65 spindles? that sounds intriguing...

Anyway, welcome to the forum.

One swedish F100 -65

Re: One swedish F100 -65