Brake Light Bracket ( pattern ) conversion for 1965
Brake Light Bracket ( pattern ) conversion for 1965
I had copied a pattern from one of these sites a fellow had done, the pattern when fabricated allowed the brakelight switch to locate under the dash and ride on the brake pedal lever, the dims on his patterm was in MM and when converted out doesn't seem right, and doesn't match the printed form, does anyone have the actual dims and pattern in U.S. regular inches?
Griffin GA 1965 F100
Have 3, one daily driver others in different state of repair/disrepair
Have 3, one daily driver others in different state of repair/disrepair
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842
guess you are talking about this
http://fordtruk.com/index61.html
i have no idea why Lance did metrics on that piece,
i just took the rubber bumper out and put my switch in the existing hole.
http://fordtruk.com/index61.html
i have no idea why Lance did metrics on that piece,
i just took the rubber bumper out and put my switch in the existing hole.
1966 F250 4x4
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
1964 Rambler Ambassador 990
Rest in peace departed Slick family members
Cam Milam
Lesley Ferguson
Steve Lopes
John Sutton
Brake Light Conversion
YES
Thats it
Thanks the print out of the pattern ISN'T the measurements, you think he has the US measurements?
You say you just removed the rubber bumper and the switch fitted in the hole and works ok?
Thats it
Thanks the print out of the pattern ISN'T the measurements, you think he has the US measurements?
You say you just removed the rubber bumper and the switch fitted in the hole and works ok?
Griffin GA 1965 F100
Have 3, one daily driver others in different state of repair/disrepair
Have 3, one daily driver others in different state of repair/disrepair
-
- Posts: 11470
- Joined: July 11, 2006, 11:28 am
- Location: Dove Creek, Co. elevation 6842