who carries floorpans for a 66 slick

66 F-100 Ratrod Kustom · November 28, 2008, 11:22 pm

who carries 66 slick floorpans

Bill W · Post by **Bill W** » November 28, 2008, 11:45 pm

How much of the floor do you need?

66 F-100 Ratrod Kustom · November 28, 2008, 11:50 pm

just the square section in front of the where it drops down and to the side of the tranny hump
post pic links in a sec

66 F-100 Ratrod Kustom · November 28, 2008, 11:52 pm

http://viewmorepics.myspace.com/index.c ... D=15071563[/img]

Bill W · Post by **Bill W** » November 28, 2008, 11:59 pm

the link says private only, but i'll bet my parts truck has what you need. the roof is gone off it for another ford truck, so..... perfect for cutting up. PM me if you want.

66 F-100 Ratrod Kustom · November 29, 2008, 12:20 am

well i dont know because thats a long way to ship it

36truck · Post by **36truck** » November 29, 2008, 12:31 am

If you were to buy new you would still have to ship it anyway. A floor section can't be very $$$ to ship.

66 F-100 Ratrod Kustom · November 29, 2008, 12:42 am

true, i dont know who carries them for sure either

racerx1699 · Post by **racerx1699** » November 29, 2008, 8:40 am

You can find your floor pans here.

http://www.carolina-classics.com/Detail ... ategory=27

6166 Junkyard Dog · Post by **6166 Junkyard Dog** » December 1, 2008, 7:37 am

just came back anyway I beware some of these sell those black Tawain ones when there is still some of us,,very few that sell USA ONES,, Always ask your sales rep hwre they are made and You be the judge

Max · Post by **Max** » December 1, 2008, 9:32 am

I agree! Awhile back, I ordered a pair of rear cab corners and they were made in Taiwan - good stamping, but I couldn't have used them to cover my Thanksgiving turkey they were so thin. Sent them back and got some good ol' American ones.

6166 Junkyard Dog · Post by **6166 Junkyard Dog** » December 1, 2008, 10:43 am

HEY Max your so right on cab corners, those Tawain ones we compared at Turkey Rod Run to our USA Made ones Tawain was half the thickness and then when you grind them down you will burn a hole threw them + the guy paid 45.00 for those junk ones ,, that is why we sell usa made replacement parts or we don't sell at all

Max · Post by **Max** » December 1, 2008, 10:55 am

One other note on those cab corners... I won't name names, but the company I bought them from (in California) took the Taiwan specials back with no problem at all and actually recommended who to buy the American ones from (N. Carolina). Also told me anything painted black is thin and only coated that way for the ride on the ship over here.

ICEMAN6166 · Post by **ICEMAN6166** » December 1, 2008, 1:22 pm

my uni came with 2 replacement cab mounts in boxes, think they are from jc whitney, i have paper thicker than they are and would not bother using them.