Slick Cutouts Update

Truckrat · Post by **Truckrat** » February 23, 2010, 9:46 pm

Ok, I finally was able to go visit with the new vendors here last Sunday the 21. We made some refinements to the trucks here and there and changed around some things to make them look better including the wheel treatments. Basically they are the same as the last bunch I posted before with the white and two toned white and red cutouts. They are also on my profile if you want to see them that way.
The prices for them to do the cutouts range from $22 - $25 depending on if you want a shortbed, longbed, or crewcab truck. The longer the truck is, the extra buck or two or three. Now, I know this is over double what the other place did them for, but the other vendor has to have orders for a minimum of 25 trucks to get them for the same price ($10) as before.
These new guys don't have a minimum order and can do them in a couple of days. So, with this in mind, how many of you want to put a big order of 25 trucks together and how many want to order some and get them back a lot sooner? Your choice on this. Just let me hear from you all about what you want to do. Everyone who was on the first order was real happy with the ones they got. I hope to see them posted on here soon. I know they are a ton easier to paint than the real ones. Lol! So, you guys give me feedback on what you want to do. Thanks! TR

macgiobuin · Post by **macgiobuin** » February 25, 2010, 1:24 pm

I'm for the less expensive option. I'd get 2 at $10.

Post by **Greg D** » February 25, 2010, 1:30 pm

I am game for the new ones - I just like them better. LWB Uni and oh BTW - low?

36truck · Post by **36truck** » February 25, 2010, 1:32 pm

PM sent

Okla66F100 · Post by **Okla66F100** » February 25, 2010, 4:40 pm

TR,

What's easier on you? You're the one doing all the running.

JR66Ford · Post by **JR66Ford** » February 25, 2010, 7:54 pm

Ok, I haven't been around in awhile. What are these cutouts?

Jason Russell

kstones63 · Post by **kstones63** » February 25, 2010, 9:55 pm

Truckrat,
Do you have the computer images for these trucks? I have an idea to run buy a friend of mine that does sandblasting but he will need the computer images for this.

Kevin

cookster4495 · Post by **cookster4495** » February 26, 2010, 9:35 am

I'm in for the new batch,a 66 short,and a 64 crew

macgiobuin · Post by **macgiobuin** » February 26, 2010, 3:33 pm

I'll go with whatever y'all want. I'd like a blue lwb.

Truckrat · Post by **Truckrat** » February 27, 2010, 8:42 pm

Thanks for the feedback, guys! I need to mention a few more things here about ordering and shipping. We can order from either vendor, but to get the trucks at the $10 price we have to have a 25 truck order, otherwise they are $15 each plus shipping. If we order from the new vendors, there is no minimum order, but I would like to have several orders at a time to send in. It is about a 100 mile run round trip for me to pick them up. I don't mind doing it, just not practical for one or two. Their prices are $22-25 each plus shipping. Last orders I did were all over $5 each for shipping, so might have to adjust that a bit. PM me with any questions you have and I will be happy to answer them.

BTW, would any of you be interested in a cutout of the grill like in your truck? I think I can get them to do those, too. What do you think?

TR

macgiobuin · Post by **macgiobuin** » February 28, 2010, 1:11 pm

Well, the only pretty grille is the '66 of course....

Truckrat · Post by **Truckrat** » March 1, 2010, 9:43 pm

I talked to the folks over at the new vendors again and they said they would do the short bed trucks for $22 each and the long bed trucks including crewcabs for $24 each. So...........with that in mind, how many want to get in on this order I am putting together? I have about 5 or 6 so far. Keep in mind that shipping will average about $7 per truck, since most of the last bunch were all over the $5 range by a buck or two. I estimated lower than I should have on that one. My fault.
Sorry about the higher price on the trucks, but that is cheaper than the $28 - 30 they were originally talking about. So I got them down about $6 from that. Not too bad, but as I had said before, the old vendor still wants a minimum order of 25 to get them for $10 each. If I could, I'd have him make up a dozen of each and bring them to SS, but I need to fix my truck with that money, so.......... TR

Truckrat · Post by **Truckrat** » March 4, 2010, 12:14 pm

Anyone who wants to order a cutout from the old vendor can order them in what ever number they want, and they are $15 each plus shipping for quantities less than 25. TR

thrush544 · Post by **thrush544** » March 11, 2010, 11:11 am

Truckrat, Thanks for all the leg work you are doing. Wow!!!

must drive you crazy sometimes.

65Lover · Post by **65Lover** » March 11, 2010, 11:33 am

BTW, would any of you be interested in a cutout of the grill like in your truck? I think I can get them to do those, too. What do you think?

Have any examples of these? Would like '63, '65 and '66!!
Thanks for all of your efforts with these Gary!

DukeRoche · Post by **DukeRoche** » March 11, 2010, 4:28 pm

Put me down for a 64 LWB for $25. Just let me know where to send the money to and I'm down

thrush544 · Post by **thrush544** » April 2, 2010, 1:37 pm

When you are ready to order put me down for 2 62 LWB Unibody.

[albumimg]7969[/albumimg]

Whichever way you are going to order them. Then let me know how much and where to send the money.

Thanks!

slickmainer · Post by **slickmainer** » April 2, 2010, 2:00 pm

sadly, I had a slow day at work and made a grill in MS Powerpoint. LAME :roll:

thrush544 · Post by **thrush544** » July 10, 2012, 9:46 pm

Are these still available?

Slick Cutouts Update

Slick Cutouts Update

Slick Cutouts

Slick Cutouts

Old Vendor

Re: Slick Cutouts Update